Taj Enterprises

Motorised Deep Throat Swaging Machine
Throat depth : 18"
Capacity : 1.2mm ( 18SWG )
Motor required.: 2hp 
Working centre of spindle : 89mm

Manual operated grooving machine
Suitable for grooving in M.S/S.S/Galvanised sheets
Specifications:-
Type:- Manual
Material:- SS & M.S
Colour: Blue
Brand:- Taj Enterprises

Motorised Grooving Machine
• Power : 750w 220v
• Die size : 3"
• O/P rpm: 60
• Suitable for :
Alluminium / MS Sheet Clading & Grooving

Manual operated grooving machine
Suitable for grooving in M.S/S.S/Galvanised sheets
Specifications:-
Type:- Manual

Weight : 3kg

Capacit: 0.2-0.8mm

Material:- SS & M.S

Brand:- Taj Enterprises

Spring controlled arbor pressspecifications :
arbour size : 21 mm
centre distance : 85 mm
Max distance from spindle nose to table : 170 mm
table size : 100 x 90 mm
weight : 9 kg

Motorised Sheet Rolling Machine
▪︎ Roller length : 1250mm
▪︎ Roller dia : 100mm (Top) , 90mm (Bottom)
▪︎ Motor : 3hp 440v 1400rpm
▪︎ Rolling Capacity : 4mm
▪︎ Weight : 550kg

Foot operated shearing /Treadle shearing machine is designed and developed for accurate BURR-FREE cutting of thin or thick sheet in minimum strength, it helps to get more production in minimum time, two best quality of spring provided for quick return of ram (Upper Beam), fittedwith side, back, front gauges and table extension. ( Hold down can be provided at an extra cost) This machine is suitable to cut M.S., S.S., Copper, Brass, Aluminium,P.V.C., P.C.B., CRC, CRGO, CRNGO, G.R Sheets and etc. Also applicable to M.S., S.S cutting, Block maker, Furniture, Fabricaters, Tube light patty, Calander rim, Electrical fitting, Electronics, Tin container, RP Caps, Electrical and transformers stamping industries.
Standard Accessories:- Set of 4 edge blade of OHNS/HCHCR, Side, Back, Front gauges and table extention.
Extra Accessories :- Treadle return spring, Hold down spring, set of 4 edge blade OHNS /HCHCR, U treadle in place of std.-Long table extention, Hold down.

Roll GrooverPipe grooving
- capacity : 2"-8"
- Motor capacity : 750w 220v
- Speed : 23 rpm
- Max wall thickness : 8mm
- Weight : 70kg

Flat Straightening Machine
- No. Of Rollers : 6
- Diameter of rollers : 80mm
- Motor H.P : 1.5hp
- Gearbox Ratio : 1:20

Specifications for the above 8CH/10CH or Angle Cutting Machine, Shearing Machine
1) The above machine is called the 8CH or angle cutting shearing machine.
2) It is used to cut 1.5″ * 1.5″ / 2.5"*2" angle cutting of M.S. Steel.
3) Cuts Angle cuts of up to 3mm/4mm
4) It is used to cut squares and round of up to 13mm/16mm thickness and sheets of upto 3mm/5mm thickness.

Specifications :
Model no : CHP 12 INV
Power : 3hp 3ph
Bevelling Sheet Range : 6-40mm
Approx weight : 65kg

The CHP 12 INV can bevel in an upside-down position effortlessly in a complete self-feed mode. As its emblematic model the CHP 12, the beveler CHP 12 INV is the perfect solution to bevel largediameter tubes as well as tankheads, thanks to its breathing valves.
Its bevelling speed makes this machine the most high performance and flexible beveling system of all the CHP 12 range for large plates and diameter tube bevelling, simplifying production processes as much as possible and reducing production time.
Benefits of standard shearing cutting bevelling machine CHP 12 INV
Flexible: breathing valve to change position easily.
High profitability: high speed self-feed bevel -2,6 m/min.
Constant and uniform bevel depth + high bevel capacity up to 17 mm bevel.
Dry cut: no need to prepare plates and tubes to bevel.