repeat">
Taj Enterprises
Taj Enterprises
Bhosari, Pune, Maharashtra
GST No. 27AADFT5294J1ZP
08048953801 78% Response Rate
Send E-mail

Measuring Equipment

Pioneers in the industry, we offer cast iron bench center, granite surface plate, slip gauge set, bench centre cast iron base, kristeel radius gauge and dial magnetic stand from India.
Request CallBack
  • Cast Iron Bench Center
  • Cast Iron Bench Center
  • Cast Iron Bench Center
Cast Iron Bench Center
Get Best Quote

Cast Iron Bench Center

Approx. Price: Rs 13,500 / PIECEGet Latest Price
Product Brochure
Product Details:
MaterialCast Iron
Automation GradeManual
Capacity150x75MM
Center Distance150mm
Height Of Center75mm
OrientationHORIZONTAL
I Deal InNew Only
Country of OriginMade in India
Some of the salient features of our Bench centers are:
• The base of bench centers and its heads are artificially stress relieved as precaution against distortion
• One of the center is spring loaded to ensure uniform pressure while holding and easy loading and unloading of work piece without disturbing the accuracy.
• Centers are made from high carbon steel hardened and ground finish, having more taper MT-3 and are replaceable.
• Both heads are adjustable to the required positions, easy and quick setting of the required distance between the centers.
• The heavy duty bed is provided with two T-Slots, parallel to each other

Yes! I am Interested
Request CallBack
  • Granite Surface Plate
  • Granite Surface Plate
  • Granite Surface Plate
  • Granite Surface Plate
Granite Surface Plate
Get Best Quote

Granite Surface Plate

Approx. Price: Rs 6,500 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialGranite & cast iron
Size400-2000mm
ShapeSquare / Rectangular
Product TypeSurface Inspection Plate
IndustrialInspetion Purpose
Country of OriginMade in India

Some of the unique features of our range of plates are:

• Uniformity In Hardness
• Accurate Under Load Conditions
• Vibration Absorbent
• Easy To Clean
• Rust-Proof, Non-Corrosive
• Thermal Stability

• Wrap Resistant
• Low Porosity
• Non-Abrasive, Non-Magnetic

These advantages make black granite surface plates inherently stable and unmatchable against any other material. These plates are supplied with computerized calibration certificate traceable to national physical laboratory (npl, govt of India ) new Delhi. Rexin covers are provided with each surface plate for protection of top surface. We provide fabricated stand with leveling screws on request by our clients. The overall working height of surface plates with stand and leveling screw will be 900 mm (approx) from floor level.

Types of surface plate

  • granite surface plate
  • cast iron surface plate

Yes! I am Interested
Request CallBack
Slip Gauge Set
Get Best Quote

Slip Gauge Set

Approx. Price: Rs 11,000 / SetGet Latest Price
Product Details:
MaterialSteel
ClassGrade 2
Measuring Range1.005-100mm
BrandHi-Mezar
Set Of Quantity83 pc
Steel gauge blocks are widely used since most of the manufacturing components are made from steel which nullifies the measurement difference due to same thermal coefficient of expansion. Steel is ideal for regular use when used with proper care & regular maintenance.

Unique Features:
  • Highly accurate, very low deviation from flatness, surface finish & nominal length
  • High resistance to wear & dimensionally stable
  • Superior wringing quality
  • Each gauge block is marked for size & serial number

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Bench Centre Cast iron Base
  • Bench Centre Cast iron Base
  • Bench Centre Cast iron Base
  • Bench Centre Cast iron Base
  • Bench Centre Cast iron Base
Bench Centre Cast iron Base
Ask For Price

Bench Centre Cast iron Base

Product Price : Get Latest Price
Product Details:
MaterialCast Iron
Automation GradeManual
Center Distance2250mm
Width325mm

Heavy Duty Cast Iron Bench Centre base
Bed length : 2250mm
Bed width : 325mm
Bed height : 175mm
Material of Construction : Seasoned Cast iron


Yes! I am Interested
Request CallBack
  • Kristeel Radius Gauge
  • Kristeel Radius Gauge
  • Kristeel Radius Gauge
Kristeel Radius Gauge
Get Best Quote

Kristeel Radius Gauge

Approx. Price: Rs 400 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialSTEEL
Usage/ApplicationIndustrial
Size1-7,7.5-15,15.5-25mm
Measuring Range1-7mm ; 7.5-15mm ; 15.5-25mm
Product TypeRadius Guage
Country of OriginMade in India

Radius Gauge offered are made available i quality construction finish and comes with options of multi-indicators that allows measuring random radius of arc. Further, these gauges support outside/inside/depth/step measurement and can also be OEM developed as demanded from us. Some of its features include multi radial indicator digital radius gauge; zero setting support; inch/metric conversion; data output support; five changeable measuring jaw; allows for outside, inside, step and depth measurement; can be delivered in hardness as per requirements.
Specifications
 

Package:Plastic box pack; Wood box packing; Or as required

Material:Made of stainless steel

Measurement:Four way measurement (OD, ID, Step Depth)

Cover:Metal casing cover 


Yes! I am Interested
Request CallBack
  • Dial Magnetic Stand
  • Dial Magnetic Stand
  • Dial Magnetic Stand
  • Dial Magnetic Stand
Dial Magnetic Stand
Get Best Quote

Dial Magnetic Stand

Approx. Price: Rs 1,800 / PieceGet Latest Price
Product Brochure
Product Details:
dial standFlexible
Maximum Reach250 mm
Approx Weight1.2 kg
Suitable forPluger Dial , Lever Dial
magnet capacity50kg

Dial Magnetic Stand offered can be made available by us in different finish configurations so as to perfectly match up with he specific demands of the customers. Further, these magnetic dial stands comes supported by fine adjustment options and feature push-button-switch on and off support. Some of its features include rotary-switch on/off; flexible stem magnetic base holders; allows locking into exact position; flexible stem with locking plier; dial indicator; available in OEM construction finish support.

Specifications :

  • Type : Fine Adjustment
  • Display Type : Analog
  • Material : Metal
  • Stand Type : Magnetic
  • Dial Indicator Style : Vertical
  • Packing Type : Plastic Box

Product Attribute:


Application: Industrial, Laboratory


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Combination Square Set
  • Combination Square Set
  • Combination Square Set
Combination Square Set
Get Best Quote

Combination Square Set

Approx. Price: Rs 2,100 / SetGet Latest Price
Product Brochure
Product Details:
Size300mm
Usage/ApplicationMeasurement
Accuracy0.02mm
Number Of Pieces4
Measuring Rate0-360 Deg

Features  :
The hardened and tempered steel ruler is machine marked. The graduations are deeply etched and easy to read. On one side of the ruler, the graduations in 1 mm and 1/2 mm run from left to right, and on the other the same scale runs from right to left. It comes with regular finish.

We offers the square head and centred head made of cast iron or of forged and hardened steel. Our regular package features the quality option: forged and hardened steel, so you get the best available. The round protractor head is made of cast iron and is reversible.

Very useful accessories included in the package are the the hardened-steel scriber and the spirit levels included in the square and protractor heads.


Yes! I am Interested
Request CallBack
  • Dial Bore Gauge
  • Dial Bore Gauge
  • Dial Bore Gauge
Dial Bore Gauge
Get Best Quote

Dial Bore Gauge

Approx. Price: Rs 3,200 / SetGet Latest Price
Product Brochure
Product Details:
Measuring Range18-35mm
MaterialStainless Steel
Meter TypeAnalog
ShapeRound
Size18-35 mm

Bore Gauge offered comes in precision construction finish and finds use in measuring distance of diameter, roundness, taper with parallel surface. Further, it comes with wide positioning bridge so as to ensure centre in centre of hole. Some of its features include suitable for internal measurements; measuring range of 6 to 450mm; gauge comes with dial indicator; steel-harden-tipped contact point for excellent durability; equipped with diaI indicator; traceability to international standards.


Yes! I am Interested
Request CallBack
  • Manual Torque Wrenches
  • Manual Torque Wrenches
  • Manual Torque Wrenches
Manual Torque Wrenches
Get Best Quote

Manual Torque Wrenches

Approx. Price: Rs 4,500 / PieceGet Latest Price
Product Brochure
Product Details:
Drive Size1/2 Inch
BrandTorque Master
Usage/ApplicationIndustrial
Product Typetandard click type Torque Wrench
ModelTM

Torque Wrench offered comprise square hydraulic torque wrench that is designed and developed to deliver good performance as well as are precision machined for enhanced accuracy and process repeatability. Further, its 360° swivel fittings also allow for superior hose movement. Some of its features include stainless steel finish with fewer moving parts; coated finish of all exposed parts for resistance to corrosion; precision calibrated finis to ±0 .03 accuracy.

Specifications :

Model No.Square Drive InchOal at Min Capacity mmHead Width mmHead Depth (with Bit) mmWeight Appx, (Kgs)
TM 104280231225330.6
TM 254280234525330.7
TM 504273748030451.1
TM 1004273760032552.25
TM 1604273762032552.45
TM 2504273782532553.1
TM 40042798103048656.61
TM 50042798107548657.6
TM 750427981370567514
TM 750S11370568515
TM 100011410708517
TM 140011550708520
TM 200011815708530

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Depth Vernier Caliper
  • Depth Vernier Caliper
  • Depth Vernier Caliper
Depth Vernier Caliper
Get Best Quote

Depth Vernier Caliper

Approx. Price: Rs 2,100 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialStainless Steel
Size/Dimension6"/8"/12"
Measuring Range0-150mm/200mm/300mm
Usage/ApplicationLaboratory
Vernier Caliper TypeDepth Vernier

Depth Gauge offered can be made available by us in different finish specifications and have hardened stainless steel frame and measuring jaws for flawless working performance. As professional manufacturer for tools, these digital depth vernier callipers also provide for lasting performance.
Some of its features include

Hardened stainless steel main scale and measuring jaws;

Knurled locking screw for convenient measurement and reading support;

Higher quality glass fixed grid;

Quick display of measured value on LCD screen;

Multi-function button with depth measuring blade;

Allows for zero-setting at any position.


Yes! I am Interested
Request CallBack
  • Magnetic Spirit Level
  • Magnetic Spirit Level
  • Magnetic Spirit Level
Magnetic Spirit Level
Get Best Quote

Magnetic Spirit Level

Approx. Price: Rs 150 / PieceGet Latest Price
Product Brochure
Product Details:
BrandCOLT
MaterialAluminum Frame and
Size300mm
ColorRed
Accuracy1mm
Available Sizes6"-72"

Our domain expertise has enabled us to present an exquisite range of Spirit Level. In order to meet the precious requirements of clients, we are providing these products in customized options. Moreover, we offer these products at market leading prices and in bulk demands. Our skilled quality controllers test this Spirit Level on different parameters to confirm with industrial standards. We design these products in bulk to the rising demands of the customers.
Features:

Strong build

Shear strength

Fine quality


Specifications:

Material:Aluminium

Measuring Range:300-15000mm

Accuracy:

0.5mm/m and 1.0mm/m are available

Packing:PVC heat-shrinked


Yes! I am Interested
Request CallBack
  • Master Block Level
  • Master Block Level
  • Master Block Level
Master Block Level
Get Best Quote

Master Block Level

Approx. Price: Rs 6,500 / PieceGet Latest Price
Product Brochure
Product Details:
Size6"
Level Accuracy0.02mm
Is It MagneticNon Magnetic
I Deal InNew Only
BrandYuzuki

Features :
•High precision longitudinal and transverse vials •make it possible to check or level surfaces
•Features all essential specifications required for versatile height standard
•0.00024 In/12 In Sensitivity
Sizes:
•100mm (0.02mm)
•150mm (0.02mm)
•200mm (0.02mm)
•300mm (0.02mm)


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Precision Straight Edge (I Section)
  • Precision Straight Edge (I Section)
  • Precision Straight Edge (I Section)
Precision Straight Edge (I Section)
Get Best Quote

Precision Straight Edge (I Section)

Approx. Price: Rs 4,500 / PieceGet Latest Price
Product Brochure
Product Details:
Usage/ApplicationIndustrial
TypeI Section
Length1mtr-5mtr
Material of ConstructionCast Iron
Country of OriginMade in India

Cast Iron Straight Edges that are widely used for erection, commissioning and leveling purpose. I- section straight edges is used to check the surface flatness of large precision area such as surface tables and machine tables etc. Cast iron straight edges are also used for blue matching during hand scrapping operations .I-section straight edges have wide and parallel working surface for application of spirit level. I –Section straight Edge are made as per IS 5268:1991 Grade-1.

Our cast iron I-Section Straight Edges are made of good quality closed grain cast iron strictly as per IS 210:1993 confirming to Grade FG-220:

•Castings are stress relieved either by natural aging or by artificial seasoning.
•Hardness 170-220 BHN.
•Hand scrapped for surface finish of Grade-1 accuracy.
•Wooden covers are provided with each straight edge to protect working surfaces.
•Safe storage wooden box can also be provided on request at extra cost.
•Actual dimensions of Straight Edges may be more or less than those mentioned in the table below therefore the sizes and dimensions of straight edges of the same length may vary.
•Only match pair Straight edges will have the same dimensions (i.e. overall depth). The flatness and parallelism will be within specified limits of the standard and those can be used as Matched pairs.
•I-Section Straight Edges are supplied with computerized calibration certificate traceable to National Physical Laboratory (NPL, Govt Of India ) New Delhi.


Yes! I am Interested
Request CallBack
  • Large Outside Micrometer
  • Large Outside Micrometer
  • Large Outside Micrometer
Large Outside Micrometer
Get Best Quote

Large Outside Micrometer

Approx. Price: Rs 9,500 / PIECEGet Latest Price
Product Brochure
Product Details:
TypeOutside
Usage/ApplicationMeasuring
ApplicationIndustrial, Laboratory
MaterialChromium Steel
Spindle Diameter10 mm
large micrometer with adjustable anvil

Features: Wide measuring range with adjustable anvil.High accuracy standard collars enable that reading does not have to be reset when changing collars.

Specifications :

  • Standard collars: Within 1000mm/40": 25mm/1",50mm/2"; Over 1000mm/40": 50mm/2",100mm/4".
  • Carbide measuring faces : Pipe combined frame.
  • Resolution : 0.01mm / 0.001".


RANGE
  • 900-1,000 mm
  • 1,000-1,200 mm
  • 1,200-1,400 mm
  • 1,400-1,600 mm
  • 1,600-1,800 mm
  • 1,800-2,000 mm

Yes! I am Interested
Request CallBack
  • Mechanical Edge Finder
  • Mechanical Edge Finder
  • Mechanical Edge Finder
Mechanical Edge Finder
Get Best Quote

Mechanical Edge Finder

Approx. Price: Rs 850 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialMild Steel
Automation GradeManual
Diameter10mm
size4mm , 10mm
Country of OriginMade in India
Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. How To Use Edge finders are easy to use. They are placed in a collet or chuck. The worktable is then traversed to obtain contact between the rotating edge finder and the work. Contact will shift to concentric position relative to the body and with very slight additional table adjustment, will move off center with a decided wobble. At this point, the center of the finder is exactly one-half the diameter of the contact from the work edge, permitting accurate location for other machining operations relative to the edge.

Specification:
  • 0.375" body diameter
  • 0.200" diameter contact point

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Sine Bench Centers
  • Sine Bench Centers
  • Sine Bench Centers
Sine Bench Centers
Get Best Quote

Sine Bench Centers

Approx. Price: Rs 15,000 / SetGet Latest Price
Product Brochure
Product Details:
Usage/ApplicationLaboratory
Size200x50mm
Distance between Roller200mm
Centre Height50 mm
Centre Distance200mm
Country of OriginMade in India

A special type of sine bar is sine centre which is used for conical objects having male and female parts.
Product Details:
Manufactured in the range of 200 mm, 300 mm
Design & Accuracy as per IS 5979 - 1981 for checking taper angles of components having centers
This is most reliable method for taper checking of components having centers
For checking taper angles of components having centers


Yes! I am Interested
Request CallBack
  • Pistol Caliper
  • Pistol Caliper
  • Pistol Caliper
  • Pistol Caliper
Pistol Caliper
Get Best Quote

Pistol Caliper

Approx. Price: Rs 8,400 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialSteel
Measuring Range0-50mm
Accuracy0.1mm
Display TypeAnalog
Usage/ApplicationLaboratory
I Deal InNew Only
Country of OriginMade in India

External Pistol Calipers

Model 561, accy. ,1mm length of arm 230 mm, range 0-50 mm with one arm of 10 mm dia. H.S. Steel tipped, Sturdy. Directly checking Pipes & Fittings, various machined and non-machined components.
External Pistol Calipers : 
Model 540, 230 mm long arm, carbide tipped, radius 2.5 mm - accuracy, 1 mm. Long 
life use. Directly checking and measuring thickness of Castings, Forgings, Plates, Structurals, components etc.

Measuring Range

0 - 50 mm

5 0 100  mm with setting master

100 -150 mm with setting master

150 -200 mm with setting master

Model 542 as above arms length 300 mm ace, ,1mm.
Long Arm

Model 582 range 0-50 mm, accy. , 1 mm with length of arm 360 mm Long Arms. H.S. 
Steel tipped with extra long arms. Very sturdy for checking Sheets, Pipes, Structurals etc.


Yes! I am Interested
Request CallBack
  • Auto Collimator With Angle Dekkor
  • Auto Collimator With Angle Dekkor
  • Auto Collimator With Angle Dekkor
Auto Collimator With Angle Dekkor
Ask For Price

Auto Collimator With Angle Dekkor

Product Price : Get Latest Price
Product Details:
Usage/ApplicationLaboratory
Model Name/NumberAA 10
MaterialCast Iron
Barrel diameter approx40
Maximum working Distance250
Country of OriginMade in India

Auto Collimator with Angle Dekkor
An autocollimator is an optical instrument for non-contact measurement of angles. They are typically used to align components and measure deflections in optical or mechanical systems. An autocollimator works by projecting an image onto a target mirror and measuring the deflection of the returned image against a scale, either visually or by means of an electronic detector. A visual autocollimator can measure angles as small as 1 arcsecond (4.85 microradians), while an electronic autocollimator can have up to 100 times more resolution


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Torque Multiplier 3000N.M
  • Torque Multiplier 3000N.M
  • Torque Multiplier 3000N.M
Torque Multiplier 3000N.M
Get Best Quote

Torque Multiplier 3000N.M

Approx. Price: Rs 12,000 / PieceGet Latest Price
Product Details:
Minimum Order Quantity1 Piece
Torque Range (Nm)1300 - 2700 Nm
Torque Multiplier Specifications: Torque Capacity : 3000N.M / 2200 lb.ft Ratio : 1 : 25 Input square : 1/2" Output square : 1" Weight : 12kg Features :
• Precision tightening and loosening of all heavy duty fastening connections
• low energy input with high torque transfer
• Multipliers are furnished with strong ratchets ( anti-wind up ) allowing jobs to be performed easily, efficiently and safely
• Precision manufacturing ensures long life and premier quality
• shearable output drive protects gearbox in case of torque overload
• Highest possible load factor is guaranteed due to design and use of forged components.

Yes! I am Interested
Request CallBack
  • Bosch Bt150 Professional Tripod Black
  • Bosch Bt150 Professional Tripod Black
Bosch Bt150 Professional Tripod Black
Get Best Quote

Bosch Bt150 Professional Tripod Black

Approx. Price: Rs 2,500 / PieceGet Latest Price
Product Details:
MaterialPlastic
Designed ForLine Laser
ColorBlack
Tripod MaterialPlastic
Bosch Professional BT 150 Tripod Stand

Yes! I am Interested
Request CallBack
  • Bosch Gll 3 15x
  • Bosch Gll 3 15x
Bosch Gll 3 15x
Get Best Quote

Bosch Gll 3 15x

Approx. Price: Rs 6,000 / PieceGet Latest Price
Product Details:
Self Levelling Range15 m
BrandBosch

Model : GLL 3-15X


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Cast Iron Comparator Stand
  • Cast Iron Comparator Stand
  • Cast Iron Comparator Stand
Cast Iron Comparator Stand
Get Best Quote

Cast Iron Comparator Stand

Approx. Price: Rs 5,500 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialCast Iron
Size100x125 mm
BrandLuthra
Base Height150mm
Base Length125mm
Base Width100mm

Cast iron comparator stands are made of closed grain graded casting and are hand scrapped to achieve accuracy of grade – 1.Rigid and sturdy base. Serrated and Plain anvil face are hardened and ground finish. These have high wear resistance. Adjustable support arm of dial indicator.

 

Features :

  • Material Used : Cast iron
  • Temperature resistance
  • Optimum quality
  • Robust construction

Yes! I am Interested
Request CallBack
  • Dial Thickness Gauge
  • Dial Thickness Gauge
  • Dial Thickness Gauge
Dial Thickness Gauge
Get Best Quote

Dial Thickness Gauge

Approx. Price: Rs 2,600 / PieceGet Latest Price
Product Brochure
Product Details:
Throat Depth30 mm
MaterialSteel
Measuring Range0-10mm
Resolution0.1 mm
DisplayAnalog
Accuracy0.1mm
Display TypeDial

Dial Thickness Gauge offered comes designed and developed using latest technology support and find suitability for measuring thickness of steel sheet and depth of outside groover. Further, the gauge comes with support of shook -proof dial indicator and can be also provided with support of longer measuring jaws. Some of its features include coming with dryer for damp-proof usage; dial reads 0.001” and includes revolution counter reading each 0.100”; allows convenient zeroing for comparator measurements through rotation of dial bezel; nonmetallic insulating plates and serrated thumb-wheel finish among others.
Specifications

Condition:New

Type:testing equipment

Computerized:Yes

Voltage:Model

Weight:Depend on model

Application:Paper Industry 


Yes! I am Interested
Request CallBack
Master Cylinder Block
Ask For Price

Master Cylinder Block

Product Price : Get Latest Price
Product Details:
Diameter85 mm
Length225mm
MOCCast iron
accuracy5 um
Country of OriginMade in India

The body of the cylinder is made using high quality alloy steel with the aid of cutting-edge technology. Offered cylinder is comprehensively used in automotive and mechanical engineering industries to obtain hydraulic pressure from non-hydraulic pressure. Some of the noteworthy features of our Master Cylinder are mentioned below:

•High tolerance
•Withstands extreme atmospheric pressure
•Robust construction
•Hassle-free performance


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Electronic Edge Finder
  • Electronic Edge Finder
  • Electronic Edge Finder
Electronic Edge Finder
Get Best Quote

Electronic Edge Finder

Approx. Price: Rs 4,200 / PieceGet Latest Price
Product Brochure
Product Details:
Ball size10mm
Body Diameter20mm
Alarm Typebeep
Power Sourcepencil Battery A23
Country of OriginMade in India
Electronic Edge Finder with Sound

Description :

Accurate to within 0.005mm, this high sensitivity probe is ideal for precise positioning of tooling relative to the work piece. Sensing is via a spring loaded steel ball, giving complete protection against overrun damage. Operates by completing an electric circuit through the machine when the probe comes into contact with the workpiece, energising LED indicators and bleeping.

Specification :

  • 20mm diameter.
  • 157mm long 10mm diameter contact Repeatabilty within 0.0002"/0.005mm TIR
  • Designed for 2D aligning of component reference surfaces & edges, determining bore centres with reference to the centre of the machine spindles
  • Edge finder has an Industrial Robust & non wearing design, with the body made from hardened steel & a spring loaded highly accurate steel ball
  • On contact between the spherical tip & the metal component, the unit lights up, thus identifying the point of reference
  • The Audible version in addition to lighting up, also triggers alarm
  • All functional parts are hardened & accurately ground
  • Reads off any electrically conductive metal
  • Comes complete with batteries (12V Pencil)
  • Concentricity controlled to within ±0.0004" (±0.010 mm)

Yes! I am Interested

Explore more products

X