Taj Enterprises
Bhosari, Pune, Maharashtra
Send SMS
Send E-mail
| Compressor Brand | Atlas Copco |
| Discharge Pressure | 12 bar |
| Air Tank Capacity | 300 L |
| Compressor Technology | Reciprocating |
| Power Source | AC Three Phase |
| Horse Power | 10 HP |
| Maximum Flow Rate | 0-20 cfm |
| Installation/After Sales Service Required | No |
| Phase | Single Phase |
| Automatic Grade | Automatic |
| Condition | Used |
| Voltage(Volt) | 220v |
| Cutting Speed (mtr/ min) | 500 rpm |
| Power(Watt) | 1150 W |
Contact Number : +91-9822885288
Product description :
• Description Allcut 40 mm Magnetic Base Drill Machine With Using Broach Cutter
• Capacity : 40 mm
• Depth Of Drill 50 mm
• Speed 1
• Speed RPM : 500 RPM
• Motor W : 1150 W
• Magnet Force 1150 Kgf
• Power Supply AC 220 V
• Weight 28 Kg
| Capacity | 4" |
| Model | N100A |
| Voltage (V) | 220 V |
| Brand/Make | REX ; MADE IN JAPAN |
| Frequency (Hz) | 50Hz |
| Weight (kg) | 130 |
| Motor Power (HP) | 1 |
| Condition | Used |
| Chaser (inch) | 4" |
Contact Number : +91-9822885288
Product description :
Used REX Pipe Threading Machine / N100A
Efficient 3-speed transmission speeds up your work.
- Less than 100 sec to make a perfect 4" pipe taper thread. Less than 20 sec for a 1" pipe taper thread.
- Uni-auto die head for ½ - 2 " pipe. Dies are compatible with NP50A/NP80A manual die heads and Uni-auto die heads.
- Profiling die head for 2½ - 4" pipe. REX original profiling system enables precise, straight tapers, with 20 mm dies
performing at higher speed and requiring less power consumption.
- Quick, adjustable cutter.
- Quiet, maintenance-free condenser motor.
- Built-in tool box is convenient for on-site work.
- Large-capacity scrap catcher.
- Threading size, thread length, and microfine adjustment of thread diameter can all be adjusted easily.
- Compact and lightweight for its class (123kg), it can be set up by just two people.
- NV-auto and Manual die heads can be mounted as options.
Threading Capacity
(in.)Voltage
(50/60Hz) AC (V)Motor
Single-Phase (W)Rotation Speed (Unloaded)
(min-1)Weight*
(kg)Dimensions
L x W x H (mm)½ - 4
110-120 or 220-230Condenser
750 or 100043 ( ½" - ¾")123873 x 635 x 55824 ( 1" - 2")13 ( 2½" - 4")
*Your information is safe with us.
| Automatic Grade | Automatic |
| Capacity | 2.5"-6" |
| Voltage (V) | 220V |
| Brand/Make | REX |
| Frequency (Hz) | 50 |
| Weight (kg) | 170 |
| Motor Power (HP) | 1 |
| Condition | Used |
| Chaser (inch) | 2.5"-6" |
Pipe Threading Machine / 150A
Large-diameter Pipe threading machine.
Uses condenser motor for quiet operation.
Efficient 2-speed transmission speeds up work.
Powerful hammer chuck holds large-diameter pipes securely.
Uses notch profiling die head, suitable for threading large-diameter pipes.
The notch profiling die head has low cutting resistance for optimum threading of large-diameter pipes.
Threading size, thread length and microfine adjustment of thread diameter can all be adjusted easily.
SPECIFICATIONS :
BRAND : REX ; MADE IN JAPAN
Model : 150A
Threading Capacity(in.) 21/2 - 6
Voltage (50/60Hz) AC (V) 220V
Motor Single-Phase (W) 750W
Rotation Speed (Unloaded)
(min-1) : 22rpm for ( 21/2" - 3" )
7rpm ( 31/2" - 6" )
Weight :170 kg
Dimensions
L x W x H (mm)
930 x 688 x 590
| Automatic Grade | Automatic |
| Capacity | 1/2"-2" |
| Model | supertronic 2SE |
| Voltage (V) | 220V |
| Frequency (Hz) | 50HZ |
| Weight (kg) | 68KG |
| Condition | Used |
| Chaser (inch) | 1/2"-2" |
| Capacity (mm) | 50MM |
| Brand | ROTHENBERGER |
| Capacity | 20 ton |
| Brand | Mankoo Press |
| Load | 0-30 Ton |
| Power Source | Mechanical |
| Type | C Frame |
| CNC or Not | Normal |
| Automatic Grade | Automatic |
| Air Supply | 7 bar |
| Motor Fixed | 1.5hp 3ph |
| Day Light Gap | 243mm |
| Condition | New |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Automatic Grade | Automatic |
| Layout | Horizontal |
| Height Of Center | 60mm |
| Spindle Power | 100 w |
| Swing Over Bed | 160mm |
| Voltage | 220v |
| Chuck size 80mm 3 Jaw Self centering | Maximum between center 160mm |
Used Micro CNC Lathe Machine
Brand : Shunde Shine intelligent Machine co. Ltd
Travel of X axis :170MM
Travel of Y axis 120MM
Chuck size : 80mm 3jaw self centering chuck
Centre height : 60mm
spindle hole in Tailstock MT#1
Spindle power 120W
| Automatic Type | Automatic |
| Capacity | 20-40 Ton |
| Type of Press | H-Frame Press |
| Stroke | 200mm |
| Day Light Gap | 200mm |
| Condition | Used |
| Voltage | 440v |
| Capacity | 500 - 200 mm |
| Brand | Parrot |
| Power Consumption | 750 watt |
*Your information is safe with us.
| Model | VP-VR-SF-20-B-10 |
| Brand | Yuken |
| Condition | Used |
| Design | Standard |
| Material | Cast Iron |
Contact Number : +91-9822885288
Product description :
Used radial drilling machine
Capacity : 30mm (mt4)
Brand : knuth energy (made in germany)
Model : 30/1000
Specification:
Energy 30/1000
• bore capacity in steel(diameter):30 mm
• arm length:1000 mm
• workpiece height max.:1000 mm
• table-size:1000 x 710 mm
• spindle taper MT:4
• spindle turning speed range:80 - 890 U/min
• crossrail adjustment horizontal:620 mm
• crossrail adjustment vertical:680 mm
• spindle stroke:160 mm
• power requirement:1,4 kW
• voltage:440 V
• total power requirement:2,2 kW
• weight of the machine ca.:1,2 ton
• Dimensions of the machine ca.:1,40 x 0,70 x 2,05 mm
• with quill feed
• coolant pump
*Your information is safe with us.
Description:
Universal Head for Milling machine No.3
Spindle Taper : ISO 40
Speed: 1.4 × Speed of machine spindle
Weight : 90kg
Contact number: +91-9822885288
description:
Orbital Riveting Machine
•Riveting unit with drive motor
•Robust stand
•Vertical adjustment clamping
•Two hand push button / foot switch actuation
•Precise stroke control (least count 0.04 mm)
•Filter, regulator lubrication unit for pneumatic system
Specifications
Max Capacity2(38 kg/mm) [mm] : 6
Stroke** [mm] : 0-30
Rated Power [kW] : 0.37
Air Pressure [bar] : 2-6
Shut Height+Max (A) [mm] : 180
Throat Depth(B) [mm] : 110
*Your information is safe with us.
Contact Number : +91-9822885288
Product description :
Kirloskar End suction process pump
SPECIFICATIONS
Pump type : KPD 32/13H
Total head : 20m
Rate of flow : 33.33 litres/second
Pump input : 1.05kw
Size : 32 × 50mm
Matl code : SPL
Motor : 2.2hp 3ph
Flame proof
Bharat bijlee ltd
FEATURES :
• These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile.
•
| Brand | GMT |
| Size | 450X300X350 |
Contact Number : +91-9822885288
Product description :
GMT CAST IRON ANGLE PLATES GMT Cast Iron Angle Plates are made of high duty close grained cast iron confirms to IS: 210 Grade 20 GMT have been the pioneer Cast Iron Angle plate manufacturer and exporter in India. GMT Cast Iron Angle Plates are made of high duty close grained cast iron to IS: 210 Grade 20. They are well ribbed to minimize distortion and are artificially seasoned as recommended in IS 2554: 1971. Matched Pairs Grade-II 0.08 mm. GMT Cast Iron Angle plates conform to IS 2554:1971 and are offered in two grades, Grade-I and Grade-II. They are manufactured in different sizes to meet a wide range of requirements. Grade-I plates are very carefully hand scraped on to Grade-I limits as per IS: 2554: 1971. Grade-II Plates are finish machined on all the working surfaces to accuracies conforming to Grade-II limits as per IS: 2554:1971. Plates sizes 1 to 5 provided with suitable number of T-Slots on one work face. Divided clamping holes are provided on the other working surface. T-Slots dimensions conform to IS: 2013:1962. Sizes 6 and 7 are provided with elongated slots on both the working faces to facilitate clamping. To meet special requirements, we offer precision matched angle blocks suitable to provide a convenient means for mounting and clamping work for boring and milling operations. FEATURES: They are made from heavy section castings The working surfaces are hand scraped The LBH dimensions are maintained to close tolerances T-Slots are provided on the working surfaces to facilitate clamping
*Your information is safe with us.
| Size | 1000 250 mm |
| Brand | Crystal |
Used Hinge Boring Machine
Brand : Blum Mini Press Pro
Features :
Vertical drilling and component insertion
Drilling distance settings using spindle
Pneumatic feed
*Your information is safe with us.
Standard Model (S) | Inner made of ceramic pot, Outer case made from thick gauge Mild Steel(CRCA) sheet |
TI-58 SERIES(Maximum Temperature 1200 oC.) | |||
Models | Internal size D x W x H cm | Rating KW | Max Temperature |
TI - 58 HTB | 30 × 15 × 15 | 3.5 | 1200 oC. |
| Layout | Horizontal |
| Model | STL-25 |
Contact Number : +91-9822885288
Product description :
Used Six station Turret lathe machine ( Traub Machine )
Specifications :
Spindle Capacity Round : 25 mm
Hexagonal : 22 mm
Square : 22 mm
Main spindle speeds : 550 - 4000 rpm
Adjustable production Rate ( Pc/hr ) : 28 - 2100
Distance ( Collet - Tailstock) : 240 mm
Main spindle motor ( Kw / H.P ) : 1.2 / 1.6
Main spindle motor speed : 1500 - 3000
*Your information is safe with us.