repeat">
Taj Enterprises
Taj Enterprises
Bhosari, Pune, Maharashtra
GST No. 27AADFT5294J1ZP
08048953801 81% Response Rate
Send E-mail

Chucks and Chuck fixtures

Wholesaler of a wide range of products which include used eccentric compensating chuck with retractable jaws, 6 jaw self centering chuck, used hydraulic power chucks, mini lathe chuck, crank shaft machining chuck and 3 jaw self centering chuck 500mm.
Request CallBack
  • Used Eccentric Compensating Chuck with Retractable Jaws
  • Used Eccentric Compensating Chuck with Retractable Jaws
  • Used Eccentric Compensating Chuck with Retractable Jaws
Used Eccentric Compensating Chuck with Retractable Jaws
Get Best Quote

Used Eccentric Compensating Chuck with Retractable Jaws

Approx. Price: Rs 55,000 / PieceGet Latest Price
Product Brochure
Product Details:
No. Of Jaws3
Holding Capacity200mm
Automation GradeAutomatic
BrandGMT
Number Of Jaws3
Country of OriginMade in India

Power Operated Eccentric Compensating Chuck with three / two retractable jaw chuck permits shafts, bars, forgings to be machined full length in one set up, centre to centre. In the first operation the component is gripped on the jaws. In the finishing operation the jaws are retracted and the component is driven by the face driver and OD is machined. The special jaws are designed to clamp the component as close to the centre to avoid distortion of the component and provide inconsistent gripping. Eccentric Compensating Chuck with Retractable Jaws and face drive (PER) is used for machining forgings and black bars between centres in single setup, (i.e.) no second operation necessary. This Chuck is designed to machine components centre to centre with great accuracy. The retractable jaws are actuated by a hydraulic cylinder or an also centre to centre, since the jaws have an eccentric clamping drive. After various machining operations are done on the component, without stopping the machine the clamping jaws are retracted. The torque is then transmitted through the face driver for driving the jaws. The gripped portion can now be finished with fine depth of cut. This ensures that the component is machined right upto the chuck face and the centre to centre machining of component is completed. The chuck body is made from forged medium carbon steel and toughened. The levers and hinge pins are made from nickel chrome steel, case hardened and ground in all working surfaces. The hard jaws are made from low carbon steel, case hardened and ground. The special jaws are designed to clamp the component as close to the centre to avoid distortion of the component and provide inconsistent gripping.


Yes! I am Interested
Request CallBack
  • 6 Jaw Self Centering Chuck
  • 6 Jaw Self Centering Chuck
  • 6 Jaw Self Centering Chuck
6 Jaw Self Centering Chuck
Get Best Quote

6 Jaw Self Centering Chuck

Approx. Price: Rs 8,200 / PieceGet Latest Price
Product Brochure
Product Details:
Model6 Jaw
Number Of Jaws6
MaterialCast Iron
Automation GradeManual
Country of OriginMade in India

6 jaw accuracy self centering tru chuck are mainly used to grip round machined or unmachined job having thin wall like pipe etc.. The job is not damaged as the gripping pressure is divided on six sides.One set of reverse jaws, Mounting Bolts, Operating Key & Inspection Report is provided with each chuck.


Specifications :

  • Size: 100mm to 600mm
  • Type of jaws: Solid jaws-set (outside jaw & inside jaw)or two-piece reversible jaws-set
  • Type of mount: Plain back


Sizes in mm:
• 100
• 125
• 150
• 200
• 250
• 315
• 350
• 400
• 450
• 500
• 600


Yes! I am Interested
Request CallBack
  • Used Hydraulic Power Chucks
  • Used Hydraulic Power Chucks
  • Used Hydraulic Power Chucks
  • Used Hydraulic Power Chucks
  • Used Hydraulic Power Chucks
  • Used Hydraulic Power Chucks
  • Used Hydraulic Power Chucks
Used Hydraulic Power Chucks
Get Best Quote

Used Hydraulic Power Chucks

Approx. Price: Rs 18,000 / PieceGet Latest Price
Product Brochure
Product Details:
Number Of Jaws3
Weight41 Kg
Tolerance206
Max RPM4800
Max Gripping Force55 Kn
Jaw Opening32 dia.
Gripping Range (inner)86~290mm
Gripping Range (outer)10~300mm

Hydraulic Chuck Standard: Ideal tool holders for high-accuracy machining processes such as drills, reamers, ball mills, end mills, and so on.

Hydraulic Chuck Super Slim: These tool holders are ideal for precision finishing processes in small spaces. Interference is eliminated by the slim design.

Hydraulic Chuck Jet Through:  It is Ideal for finishing applications that require improved coolant delivery.


Features:

Power Operated Chucks without through bore can be used as a replacement for manual chucks on a conventional lathe to increase the productivity.

These can be actuated by hydraulic, pneumatic or electro- mechanical actuators.

The actuating unit imparts a linear motion of the wedge is transformed to radial movement of base jaws.

This transformation provides a mechanical advantage of 1:4. This ensures a minimum of 1:2 mechanical advantage after providing for internal losses, self locking effect and losses in gripping power at high speed.

Used Hydraulic Power chucks

Sizes available : 3",6",8",10" & 12"

 

Brands available : GMT , ROHM , FORKARDT , KITAGAWA


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Mini Lathe Chuck
  • Mini Lathe Chuck
  • Mini Lathe Chuck
  • Mini Lathe Chuck
  • Mini Lathe Chuck
Mini Lathe Chuck
Get Best Quote

Mini Lathe Chuck

Approx. Price: Rs 5,300 / PieceGet Latest Price
Product Brochure
Product Details:
Usage/ApplicationClamping
MaterialCast Iron
Chuck Dia Maximum60mm
Through Hole8mm
TypeScroll Chuck
Material of jawsbronze

Mini Self centering lathe ChuckDiameter : 50mm 3 jaw
The 2 in. mini lathe chuck features a precision-machined tapered shank and three Phosphorus bronze jaws for a firm grip. Made of durable steel, the chuck comes with two keys (markings 1, 2, 3) and includes three Phosphorus bronze jaws.

MT1 style tapered shank
Three reverse stepped jaws
Precision machined chuck and jaws
Durable steel construction


Yes! I am Interested
Request CallBack
  • Crank Shaft Machining Chuck
  • Crank Shaft Machining Chuck
  • Crank Shaft Machining Chuck
Crank Shaft Machining Chuck
Ask For Price

Crank Shaft Machining Chuck

Product Price : Get Latest Price
Product Details:
Usage/ApplicationIndustrial
Number Of Jaws3
Automation GradeAutomatic
Size8"
Holding Capacity6"
Crank shaft Machining Chuck is a special power chuck designed for crank shaft Eccentric Turning and milling operations. This chuck can be tailor made to suit machine. Crankshaft is held between centers of RH and LH chuck. Aligning jaw of the chuck facilitates job clamping. Chucks are actuated by hydraulic cylinders.

Yes! I am Interested
Request CallBack
  • 3 Jaw Self Centering Chuck 500mm
  • 3 Jaw Self Centering Chuck 500mm
  • 3 Jaw Self Centering Chuck 500mm
3 Jaw Self Centering Chuck 500mm
Ask For Price

3 Jaw Self Centering Chuck 500mm

Product Price : Get Latest Price
Product Brochure
Product Details:
Chuck Dia Maximum500 mm
Number Of Jaws3
MaterialCast Iron
Automation GradeManual
Diameter500mm
Driven TypeManual
Thru Hole Size190mm
Weight125 kg
PCD463mm
Country of OriginMade in India
Heavy duty Ast Iron Self centering Chuck ▪︎ Diameter : 500mm ▪︎ Through Hole : 190mm ▪︎ PCD : 463mm ▪︎ Jaw Height : 55mm ▪︎ Apprpx weight : 124kg

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • True Chuck
  • True Chuck
True Chuck
Get Best Quote

True Chuck

Approx. Price: Rs 7,400 / PieceGet Latest Price
Product Brochure
Product Details:
Number Of Jaws3
BrandUNNAT , KING
MaterialCAST IRON
Size4"-16"
Country of OriginMade in India

Cast iron Self centering chuck

suitable for convenional lathe

These are heavyn duty self centering chucks used to grip machined round jobs,popular for their accuracy and long life


Yes! I am Interested
Request CallBack
  • 3" Tilting Rotary Table with chuck
  • 3" Tilting Rotary Table with chuck
  • 3" Tilting Rotary Table with chuck
3
Get Best Quote

3" Tilting Rotary Table with chuck

Approx. Price: Rs 14,500 / PieceGet Latest Price
Product Details:
MaterialIron
Usage/ApplicationMilling
Size3"
Automation GradeManual
Rotating Angle360 Degree
I Deal InNew Only
A great combo of 3"/ 75 mm Tilting Rotary table with 80mm 3 jaw Self centering Chuck with back plates & Tnuts- A perfect milling combo for smaller mills. 3inches Tilting rotary Table: 1. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3"Inches ) and is the most popular lightweight tilting rotary table for small and light-duty milling operations. 2. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1-handle rotation shall turn the table by 10 Degrees. The hand wheel is graduated in divisions of 10 min & can be set to zero. 3. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16" (62 mm). 4. Base Dimensions: 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. 80mm 3 jaw Self-Centering Chuck : 1. 80 mm 3 jaws self-centring chuck with a spare set of reversible Jaws and a chuck key, Also included is a suitable steel back plate with fixing t nuts and bolts to enable this to mount on this. 2. The Backplate is drilled with M6-size tapped holes for the chuck's bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table's T slots. 3. The Chuck body is made of high grain casting and the Jaws are made of hardened tool steel for a long life. 4. The chuck recess is 55 mm same as that of the back plate. The back plate has a 13.9 mm small spigot that helps it in centrally locate it in the centre of the Rotary Table.

Yes! I am Interested
Request CallBack
  • Universal Dividing Head HMT
  • Universal Dividing Head HMT
  • Universal Dividing Head HMT
Universal Dividing Head HMT
Ask For Price

Universal Dividing Head HMT

Product Price : Get Latest Price
Product Details:
BrandHMT
Usage/ApplicationIndexing and Dividing for milling operation
Chuck size150 mm
Centre Height125 mm
Contact number: +91-9822885288
description: 
Universal Dividing Head offered finds usage as attachment for milling machine and is designed and developed for effectively carrying out all types of gear cutting operations. Further, the product offers greater precision and efficiency and comes with provision of tilting dividing head from horizontal position of 90-down to -10. Some of its features include provision of reading inclinations off a scale graduated in degrees; dividing head designed as per highest engineering standards; product coming tested to assure complete satisfaction; suitable for use in milling, grinding and drilling machine. Specifications • Type:Dividing Head • Material:Steel • Precision:High Precision • Package:Wooden Boxes • Usage:Dividing Workpiece

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Hydraulic Boring Chuck
  • Hydraulic Boring Chuck
  • Hydraulic Boring Chuck
Hydraulic Boring Chuck
Ask For Price

Hydraulic Boring Chuck

Product Price : Get Latest Price
Product Details:
Materialsteel
Automation GradeAutomatic
Size6"
Used Hydraulic Boring Machine Chuck

Yes! I am Interested
Request CallBack
  • Mini Lathe Machine Chuck 2"
  • Mini Lathe Machine Chuck 2"
Mini Lathe Machine Chuck 2
Get Best Quote

Mini Lathe Machine Chuck 2"

Approx. Price: Rs 3,500 / PieceGet Latest Price
Product Details:
Country of OriginMade in India

Description:
• The well-designed chuck body is made of high-quality steel.Will greatly extend the service life of the chuck.
• The reversible stepped jaws of this mini lathe chuck for internally or externally holding different shapes workpiece
• This self-centering 3-Jaw chuck does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient.
• We will provide a set of installation tools. Two hand tight spanners are convenient for strengthening and clamping the workpiece.
• The chuck is easy to be used and enjoy a high centering precision.The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc


Yes! I am Interested
Request CallBack
  • Chuck Mounted Ratchet Indexing Fixture
  • Chuck Mounted Ratchet Indexing Fixture
  • Chuck Mounted Ratchet Indexing Fixture
Chuck Mounted Ratchet Indexing Fixture
Get Best Quote

Chuck Mounted Ratchet Indexing Fixture

Approx. Price: Rs 36,000 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialCast iron
Size6"
Chucksize150mm
No. of indexing stations12
Country of OriginMade in India

Horizontal Ratchet Indexing fixture can be used for cutting processes like Milling, Drilling, Grinding, etc. They are available in manual model with maximum clamping range of 300mm
These fixtures are suitable for both tool room operations as well as high production Indexing work where they offer both economy and quality in the form of less downtime and precision repeatability in job after job, hence lesser rejections. Their high quality construction gives them a long life and also makes them capable
taking heavy loads. Their compact and space saving design makes them convenient and easy to use. They can be used on a wide variety of machines like Milling, Drilling, Grinders, etc.
Features:
• Available in Ratchet indexing models of 6 station and 12 station
• These attachments are mounted with chucks of different sizes Ranging from 150-300mm
• Suitable for cutting processes like Milling, Drilling, Grinding.
• Lever operated locking arm prevents deviation during machining operations
• These ratchet indexers are constructed with precison grinded parts to prevent machining errors and provide precision repeatability in operations.


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Vertical Chuck Fixture
  • Vertical Chuck Fixture
  • Vertical Chuck Fixture
Vertical Chuck Fixture
Get Best Quote

Vertical Chuck Fixture

Approx. Price: Rs 12,000 / PieceGet Latest Price
Product Brochure
Product Details:
Size6"
Usage/ApplicationJob Holding
MaterialCast Iron
Automation GradeManual
Centre Height140 mm

Vertical chuck mounted fixture
MILLING CHUCK / CLAMPING DEVICES / MACHINING FIXTURES

Chuck Size : 6"

Maximum Clamping Size: 170 Mm

Centre Height : 140 Mm


Suitable for :

Job Holding application

Vertical clamping during Milling operation

Inspection Purpose


Yes! I am Interested
Request CallBack
  • Accuracy Adjustment Chuck
  • Accuracy Adjustment Chuck
  • Accuracy Adjustment Chuck
Accuracy Adjustment Chuck
Get Best Quote

Accuracy Adjustment Chuck

Approx. Price: Rs 9,000 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialHard Alloy
Usage/ApplicationGrinding Application
Size4" / 5" / 6" / 8"
Accuracy Adjustment0.005mm
Repititive Accuracy0.013mm
Country of OriginMade in India

These chucks are available with 3 jaws and 6 jaws and are referred as AAC-3 and AAC-6 respectively. These are used where same size of job is to be held repeatedly and accuracy desired is very high. The chuck accuracy can be adjusted within 0.005 mm with the help of micro-adjustment screws. The repetitive accuracy available with these type of chucks is within 0.013 mm. These chucks are used for tool room and grinding shop work. One set of reverse Jaws, Mounting Bolts, Allen Key, Operating Key and Inspection Report is provided with each chuck.


Yes! I am Interested
Request CallBack
  • Four Jaw Combination Chuck
  • Four Jaw Combination Chuck
  • Four Jaw Combination Chuck
  • Four Jaw Combination Chuck
Four Jaw Combination Chuck
Get Best Quote

Four Jaw Combination Chuck

Approx. Price: Rs 24,000 / PieceGet Latest Price
Product Brochure
Product Details:
Usage/ApplicationTurning and Grinding opertions
Holding Capacity200mm
Number Of Jaws4
Thru Hole Size50mm
Chuck Dia Maximum8"

also known as

Centering chucks

turning chucks

Features and Benefits

Combination independent and self-centering chucks allow each jaw to be operated independently or move simultaneously as a self-centering scroll chuck.

Cast iron also called semi-steel is the industry standard for chuck body material.

Specifications
Chuck Type : Combination Independent & Self-Centering
Nominal Chuck Size : 8"
Number of Jaws : 4
Diameter (Decimal Inch) : 2.1700
Body Material : Cast Iron (Semi-Steel)
Reversible Jaws : Reversible Jaws
Chuck Diameter (mm): 203.20
Chuck Diameter (Inch) : 8
Minimum Jaw Capacity (Decimal Inch) : 0.1500
Maximum Jaw Capacity (Inch) : 8
Body Length (Decimal Inch) : 3.7800
Maximum RPM :2000


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Universal Indexing Device
  • Universal Indexing Device
  • Universal Indexing Device
Universal Indexing Device
Get Best Quote

Universal Indexing Device

Approx. Price: Rs 38,000 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialCAST IRON
Chuck size4"
Tilting Angle0-90 deg
Through HoleNO
Country of OriginMade in India

Tilting Indexing Device ( with 3 Jaws Chuck Mounting )
Size : 4"
Features :
For bigger quantity work, rapid indexing is simplified by use of replaceable notched rings can be notched to individual requirements.
Rapid direct indexing through 360 degree by means of scales graduated in units of one degree division on the flanges.
Indirect indexing is by means of worm and worm wheel giving direct reading of one minute on handwheel scales.
The chuck can be swivelled up to 90 Degree
Worm Gear is easily and quickly detachable for direct indexing.
Three Jaws chuck is standard equipment with one set of reverse jaws.
The Graduation ring on hand knob is adjustable
Application :
An ideal indexing device for mechanics, tool makers and engravers for speedy and precision milling, drilling, boring and grinding operations.

Technical Specification
•SIZE IN INCHES 4
•Diameter Chuck (in mm) 100
•Length in mm 250
•Width in mm 220
•Height in mm 190
•Swivel 360°
•Tilting 90°
•Slot Distance in mm :170
•Weight (Approx) in kgs. 16


Yes! I am Interested
Request CallBack
  • Used Master Gripping Chuck
  • Used Master Gripping Chuck
  • Used Master Gripping Chuck
Used Master Gripping Chuck
Ask For Price

Used Master Gripping Chuck

Product Price : Get Latest Price
Product Brochure
Product Details:
BrandREISHAUER , SONALKAR , CENTRAL
Material GradeCast iron
Diameter6" / 8" / 10" / 12"
Number Of Jaw3
ShapeCircular
Usage/ApplicationWork Holding

Description & Features:
The Our 3-Jaw Grip Right Chucks (Grip Right Chucks even though not meant for heavy duty work, it is sturdily built. The chucks have a semi-steel body made of tensile cast iron with hardness between 180 and 220 BHN, or of forged steed.
The scroll plates are made of high quality heat-treated carbon steel.
The Grip-Right Chucks have a unique taper locking device between the cover plate and chuck body which allows adjustment of the chuck centre in relation to the machine spindle centre. This features allows elimination of errors caused by inaccuracy of the machine spindle or of the Chuck


Yes! I am Interested
Request CallBack
  • Used Threading Die Head Lanco Type
  • Used Threading Die Head Lanco Type
  • Used Threading Die Head Lanco Type
Used Threading Die Head Lanco Type
Ask For Price

Used Threading Die Head Lanco Type

Product Price : Get Latest Price
Product Details:
Usage/ApplicationBolt threading
MaterialSteel
Bore Size40mm
Size/Dimension3/8"-1.1/2"

Specifications :
Lanco type threading die head S
tatus : Used
Size : 3/8"-1.1/2"
Chaser size : 4" x 1.3/64" (set of 4pcs)
Product description :
Used Lanco Type threading die heads are of revolving type for application to hand operated, semi accurate to hand operated, semi automatic & automatic threading machines of rugged construction the heads provide accurate and trouble free operation over long production runs. Constructed of specially selected alloys steel, the NCT Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Universal Chuck Indexing Fixture
  • Universal Chuck Indexing Fixture
Universal Chuck Indexing Fixture
Ask For Price

Universal Chuck Indexing Fixture

Product Price : Get Latest Price
Product Details:
Materialcast iron
Chuck Size4-8"
TypeVertical & horizontal
applicationMilling
Country of OriginMade in India
Horizontal chuck indexing fixture

Features :

  • Suitable for milling / drilling / grinding operation
  • Chuck Diameter (Inch) : 8
  • Number of Indexing Increment : 24 / 30
  • Center line Height : 7.5"
  • Chuck Through Hole Size : 68mm
  • Masking Plate Divisions: 24 / 30
  • Indexing Accuracy (sec.) 25.00

Yes! I am Interested

Explore more products

X