Taj Enterprises

description: 
the SEVO vise, it’s a Swedish-made device consisting of three plates — flat on one side and rounded on the other — each attached to a swivel point. By rotating the plates into various positions you can create almost infinite grip shapes.It can be used as a regular milling vise or with the use of the multiple adjusting jaws,you can hold odd-shaped items for machining and drilling as well.Rated as a 6" vise.The vise body is approximately 16" long.
Maximum opening : 130mm.
Jaw height : 40mm
Maximum depth from jaw to base : 80mm
Screw diameter : 1"

FEATURES
• Fitted with Thrust Bearing for Smooth Movement
• Body is made of graded cast lron
• High quality ACME steel screw.
• Hardened & accurately ground jaws provided with 'V' groove
• This vice can be set up at any angle with positive locking.
• Upper angle base can incline from the horizontal position to the vertical position.
• The lower angle setting base can incline up to 45° In both right and left directions
• The entire unit may be swivelled on a base plate through 360°
• Quick alignment to machines Through longitudinal slot provided in base.
• Crank handle Is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.
• Supplied with Stopper for Fast production

Universal compound vice is suitable for Drilling,Milling and slotting operations.It has two-way travel axis which provides its user to shift the centre axis without de-clamping the job from the vice.
Specifications :
• Depth of jaws: 55mm
• opening of jaws: 115mm
• Overall length: 440mm
• Overall height: 170mm
• Overall width: 420mm
• Travel bothways: 175×150mm

We are among the prominent traders, retailers and suppliers of Drill Vice that is manufactured from ductile steel cast iron, with special steel jaws and lead screw. To cater to the diversified requirements of our clients, we proffer the compilation in 50, 75, 100, 115, 150, 200 mm specifications. Steel Jaws of the drill vice are provided with V groove for holding round jobs.

Features:

Consistent performance

Longer service life

Supreme functionality

Specifications:

Type:bench vise

material:cast iron

drive mode:manual

A Perfect Piece of Workmanship. Universal vicealows the work piece to be set at any desired compound angle, Three Swivelling Movements,graduated and with positive locking. Sliding jaws runs on accurately ground surfaces fitted with hardened steel, keep strips ensuring perfect alignment and rigidity, available in Ductile steel(S.G. Iron) body frame .

SALIENT FEATURES:

Size range : 75,100,150 mm.

Accurately designed for use on surface,

Universal, tool & cutter grinding machines.

Unbreakable sreel body.

Accurately ground jaws made out of special

Steel for firm grip.

All swivelling movements have positive

Locking and the job can be locked at any angle

FEATURES

Heavy duty shaper vice sturdy construded from close grain casting for use on shaper machines. planners & other heavy duty machines permitting wider application for taller work pieces

it is designed io permit maximum opening of jaws to hold heavy and taller jobs.

High tensile steel square thread screw.

The jaws are made of special steels.These are precisely ground & serrated to ensure rm grips on heavy jobs,

Swivel base Is lndexed m 360”, when required in use as stationery vice. the base can be removed.

Crank Handle is made of unbreakable steel. provided with a spring loaded mechanism providing positive grip.

Multi-purpose Rotating Bench Vise.
Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power.
Sizes: 4" & 6"
Anvil size: 2-3/8x3-1/8

Specifications:

Type:Angle Vise

Drive Mode:Manual

Jaw width:80mm

Jaw height:40mm

Color:Blue, optional

Very High Precision Grinding Vice for Accurate Grinding Jobs. Tool steel, through-hardened, fully precision-ground.
A high-precision grinding and control vise is a specialized tool used in machining and manufacturing processes, particularly in precision grinding operations. The primary purpose of such a vise is to securely hold workpieces during grinding or other machining operations with a high degree of accuracy and repeatability.
Vice manufactured from hardened and ground steel.
Base manufactured from steel grade cast iron.
Swivels on 2 levels, 360 horizontal, ± 45 vertical
Scale for precise minute readout
Screw for upward and downward swing
For grinding, boring, milling, eroding
Specifications:
• JAW WIDTH : 70mm
• JAW OPENING : 82mm
• JAW DEPTH : 32mm
• TOTAL LENGTH : 175mm

SALIENT FEATURES:

• Size range : 25,40,50,75,100 mm.
• Ideal for use by goldsmiths, watchmakes etc.
• Screw, Handle & Guide rods are of high quality steel.

Specifications :

Product Manufactured from graded cast iron, these vices have a precision ground base and vice bed for smooth lateral movement of the movable jaw Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round jobs of different sizes both horizontally and vertically.
Special seat in jaws facilitates retaining of flat work pieces Vices are equipped with a convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from the table edge. This feature increases the scope of application of this range of vices
3 Way Drill Press Vice
This vice is available with 3 mounting options via 2 additional precisely ground surfaces: end face and side face. This allows for drilling along all axes with a single setting of the job and holding of long workpieces which are cumbersome and difficult to manage in regular vices

Tool Maker's Vee Block & Clamping sets-Precision
Features :
Manufactured and numbered in matched pairs, each pair has two 90 degree Vees of different capacities which are identical to the Vees of its matching block. The Vees are ground central, parallel and square with the ends and sides.
Each pair of vee Blocks comes compete with a pair of rigid and robust clamps.
Application :
Useful for holding work securely during drilling, milling and grinding operations and also in layout and inspection work.
Construction :
Made from finely selected tool steel fully hardened to 50-55 HRC.
Accuracy :
Permissible height difference between matched pairs within 5 microns
Parallelism and squareness of Vee Grooves with respect to all surfaces within 8 microns
Parallelism of opposite faces of Vee Blocks within 8 microns
Squareness of adjacent exterior faces of vee Blocks within 8 microns
Flatness of working faces within 5 microns

With the support of our experts, we trade and supply Milling Vice with adjustable sideways. Made available in 100,150,200,250 and 300 mm specifications, these vices have jaws manufactured from fine quality special carbon steel. Rugged in construction, the proffered vice can be centered by using longitude tenon slot. Milling vice is provided in standardized packaging.
Features:
Longer functional life
Sturdy in construction
Have adjustable sideways
Other Details:
contained in totally enclosed sliding jaw.Tenon slots in slide and swivel base.
Jaws are made of special carbon steel properly
heat treated, fixed jaw is provided with vertical& horizontal "V jve to hold the round jobfirmly.
The Vice can be centered by using longitude
tenon slot
The swivel base is graduated fully 360Swivel Base can be converting to Fix base byremoving the base
Specifications:
Size range : 100,150,200,250,30] mm.
Graded Grey Cast Iron body.
Acme thread interchangeable screw, steel nut

• Supreme functionality
• Rugged in construction
• Consistent performance

• Size range : 175,200.225 mm.
• The vice jaws equipped with a TOE-IN feature,

Specifications :

Size : 12-200mm

Colour : Multi

Material : Steel

Pipe rests on a V formed by two sets of dropped-forged, heat-treated replaceable steel jaws

The high tensile steel chain is then looped over the pipe

Locked into a slot between the jaws and tensioned by a handle and screw

Body castings are guaranteed against breakage

Being a reckoned name in this domain we are involved in offering a wide range of Machine Clamp to our clients. This Machine Clamp is made by using advance technology and sharp edge technology. Our product is widely known for its optimum performance and easy installation.

Specifications :

• Max Clamping Range mm : 60
• T slot Size : 12-18 M
• Model : Apex CODE SG736

Features:

• Precisely engineered
• Easy to install
• Excellent performance

Features

high accuracy 0. 01/100 mm

unlimited clamping range

high quality alloy steel

hardened & ground

can be used multiple style

no length height limitations

no jaw lift

low profile

all vises are matched

supplied with stopper for fast production

• Size range : 80, 100, 150 mm.
• Self Centering Vice allows for accurate centering

• This vice is particularly usefull in milling, slot

• The vice spindle has opposite threads for quick

• This vice is usefull where the same operation

Being a client-centric organization, we are instrumental in offering a wide collection of T Bar Clamps. Easy to install, this machine spare is generally used while manufacturing drilling machines. Professional serving our vendors manufacture this machine spare with the help of quality assured raw material and sophisticated technology. Additionally, we provide this machine spare to our clients at most affordable price.
Features:
Precisely designed
Easy installation
Durability

Specifications
Type:T bar clamp, heavy duty
Material:Q235 Steel
Surface:galvanized / painting
Color:Black/Green/Or per request
Packing:Carton or Woven bag

Key Benefits

Gripping through manual screw adjustment and quick clamping through Pneumatic Machine Vices.

In-built sophisticated piston mechanism.

Clamping power of 4500 N at 7 bar (100 psi) air pressure

Grounded and hardened tool steel jaws for perfect parallelism.

steel moving jaw rules out pressure drop and air leakage

Specifications:

Drive: Pneumatic

Type: Vice

Clamping Force : 4500 N

Size : 4.0 max

• Size range : 40,50,60,85,115,150 mm.
• To grip a pipe the frame is hinged back &

• Ideal for fast repetitive work.

Our organization specializes in providing a wide range of Hydraulic Vice. This machine spare is available in different sizes and shapes and is commonly used while manufacturing drilling machines. In accordance with industry set standards, our vendors manufacture this machine spare by using premium quality raw material and advanced technology. We provide this machine spare to our clients in bulk quantity and at market leading prices. Specifications:
• Width of jaws: 150mm
• Maximum jaw opening : 300mm
• Depth of jaws: 60mm
• length overall :560mm
• Width overall: 250mm
• Weight: 45kg Features:
• Precise sizes
• Accurate dimensions
• Rust proof

These are cast with striated and heat treated jaws For holding metal during heavy bending and sledge hammering.The leg absorbs the shock.
100mm

Specifications:

• Drop Forged screw
  100mm (approx 4") jaw
  41" tall
  30" to mount
  5" maximum jaw opening
  Medium Duty