|Type||Drill Point Drills - Reduced Shank|
|Material Grade||HSS with Titanium Coating|
|Material||High Speed Steel|
|Centre Drill Bit Diameter||4mm|
HSS Step Drill offered comes in titanium coated surface finish as well as can be made available in choice of multiple sizes like 6, 8, 10, 13mm and others. Further, the use of high speed steel metal for construction as well as availability in different grades also makes these deliver lasting service performance. Some of its features include CNC made construction for precision accuracy; size range of 3.0 to 60.0; available in choice of 5 steps to 16 steps; different surface finish choices like bright, tin-coating, cobalt coating and others; suitable for use on both alloyed and unalloyed steel.
Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries.
The square chisel mortiser combines the cutting of a four-sided chisel with the action of a drill bit in the center, The bit clears out most of the material to be removed, and the chisel ensures the edges are straight and clean.
Hollow Mortising Chisel Bits are for making square mortises in one stroke and oblong mortises with each succeeding stroke.
Square hole size: 10mm,12mm,16mm & 19mm
Scope: square hole drill / chisel angle is mainly used for woodworking, square hole drilling can not be used on the drill square hole drill drill drill holes need to tie square (square Tenoner / tenon slot machines) to use.
|Usage/Application||tangetial chaser die head|
Landis Tangential Chasers and coventry dies are designed to
• Perform better
• Improve productivity
• Reduce costs
• Boost threading efficiency.
Landis standard and Coventry chasers are available in a variety of sizes, pitches and throat angles.
*Your information is safe with us.
Brand: K.S.K Japan High speed steel Model: T-218A T-101A T-101B T-118G T-118B Suitable for Bosch,AEG,Metabo.
Type : Machine Blade
Blade Material : HSS
Mounting standard : Bosch Metabo AEG
Cutting width : 1,2 mm
Packing : 5 blades per
Application : Basic jigsaw blade for cutting metal
|Size||1.1/2" - 2.1/2"|
Hall Toledo Style
Piston Cylinder Honing Kit
Comes In Metal Case
Size : 1.1/2"-2.1/2"
No.of Honing Holders: 4
|Material||tungsten carbide tip|
Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy and stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf.
Ideal for production cutting.
Tungsten carbide tipped teeth provide superb product life and cutting performance.
High cutting accuracy.
Complete assembly - there is no requirement to purchase a separate arbor and pilot drill.
Safety stop collar at the base of the hole saw.
Replacement pilot drills are available.
Important Safety Recommendations:
Should only be used to cut flat surfaces.
Maximum material thickness of 2mm for stainless steel, mild steel and non ferrous metals.
Recommended operating speed, 850 to 1200 rpm.
We recommended saws above 50mm diameter should only be used on pillar drills. Smaller diameters can be used with both hand held drills and pillar drills.
Safety glasses and gloves are recommended.
Do not push too hard, to avoid an impact of the TCT teeth. Once the teeth touch the material, drill with slight steady pressure.
*Your information is safe with us.
|Cutting Diameter||1/32" - 11/32"|
|Drill Diameter||1/32" - 11/32"|
Solid Carbide Drill bit
Inch Sizes : 1/32" - 11/32"
|Material||Tungsten Carbide ; Carbide|
|Usage/Application||Core Drilling & Mining|
Gun drills are straight fluted drills which allow cutting fluid (either compressed air or a suitable liquid) to be injected through the drill's hollow body to the cutting face. They are used for deep drilling—a depth-to-diameter ratio of 300:1 or more is possible. Gun barrelsare the obvious example; hence the name. Other uses include moldmaking, diemaking, and the manufacture of combustion engineparts such as crankcase, cylinder head, and woodwind musical instruments, such as uilleann pipes, as gun drills can drill long straight holes in metal, wood, and some plastics. The coolant provides lubrication and cooling to the cutting edges and removes the swarf or chips from the hole. Modern gun drills use carbide tips to prolong life and reduce total cost when compared with steel tips. Speed of drilling depends on the material being drilled, rotational speed, and the drill diameter; a high speed drill can cut a hole in P20 steel at 30 inches per minute.