Lifting Equipment

The inside mini crane must be fixed between roof and floor,it is used in lifting building materials through the windows from the ground to the loft.The outside mini crane is used in loading and unloading grain, it is fixed by additional weight,so on the roof it can be used in lifting building materials.

The mini crane introduction

This 360 degree rotate lifter is a pro products upgraded from LY400, the freely rotate shaft is connecting with bearing and placed at the head of column, so traditional shaft can be replaced in the same time wearing risks inside the pipe is reduced to the minimum. It is advanced products that is portable, free rotation in full angle.

Technical feature:

1. Geared motor and rope drum form as an integrity, easy assembly.

2. Motor shell apply to aluminum material, by the time of keeping shell strengthen ability, it is a good material to heat disspation.

3. Force cooling fan is equipped on both motor sides, motor duty cycle time effectively extended.

4. Instead using motor to release while there is no material on the hook, this lifting mechanism is benefiting from high working efficiency by eqiup clutch with 3 operation options.

5. Lifting speed can be doubled or stay normal by detaching or adding pulley.

6. Easy detach and assemble, portable structure can be adopt to various working envrionments.

• 3-position hand control - Raise, lower, neutral.
• 3" lowered and 7.5" raised height.
• 7" Nylon steering wheels. 3" polyurethane fork wheels.
• 210° steering arc
• fork size : 1150 x 550 mm
• big size pump
• weight : 66 kg

Capacity: 0.25T-9T
Double-cover protection; Thick friction discs; Safety latches; Overload protection.
International standards.
Feature: Light and flexible operate, heavy duty. Each spare parts strong and precise

Gear: they innovated symmetrical arrayed high speed synchronous gear and made from international standard steel. more strong and steadier.

Chain: adopt high strong chain and high precision welding technology, meet ISO international standard. Fit for heavy and overload working conditions, take your hands a better feeling,

Hook: made of high-class alloy steel, it has high strength and high security, by using new design, weight will never escape disconnect..

Plastic Plating: adopt advanced plastic plating technology inside and outside, it looks like a new one after years of operation

Housing: made of high-classed steel, more firmly and dexterous.

We are one of the eminent traders and suppliers of Screw Jack that is massively used for increasing the magnitude of an effort force. This mechanical device is used for translating lift for pallets, unstacking unit for plate materials, pivoting conveyor system and stage height adjustment, as well. Available in a varied range of sizes, these efficient and lightweight screw jacks are highly sought after.

Features:

• Rugged in construction
• Longer functional life
• Reliable performance

Specifications of screw jack have been attached herewith

Rope Pulley offered comes in durable construction finish and can be made available in different material grades like 201, 304, 316 and others. Further, these pulleys are available in sizes of 3MM, 5MM, 8MM and others as well as per industry standards like GB, DIN and others. Some of its features include option of standard and OEM finish configurations; perfectly designed to support movement of cable/belt along its circumference; provide suitable support for lifting loads; comes with durable rope as drive element.

Specifications:

• Type:Flat Belt
• Material:Nylon
• Surface:Bright polishment

Robust and reliable, our 2-4 leg chain sling products can be used to lift heavy loads safely and easily. Each sling is supplied with latch hooks, and we can supply bespoke chain slings to lift loads of up to 45 tonnes.

Features & Specifications :

• Attractive price to performance ration, due to the small price difference compared to grade 8 chains.
• One dimension smaller than grade 8 chains for many load ranges- excellent value.
• All links and components are easily identified with relevant markings. Traceability as all components are coded.
• High wear resistance- longer life span.
• Distinctive and individual identity tags to avoid confusion with grade 8 chains.
• Orange powder coated finish creates a high viability sling for ideal visual identification.
• Fast and simple assembly with patented shortening element.
  Safety feature on shortening element helps avoid danger through improperly shortened slings.
• Fewer components are used on grade 10 chains (as opposed to grade 8) enabling quicker daily/anual inspections.
  Compatible with grade 8 range, used slings are easy to repair.
• Grab hooks available with 100% load capacity- shortening sling does not require a reduction in load caused by effect of hook.

Steel lifting clamps are suitable for lifting and transporting of steel plates with a maximum hardness of 37 HrC
The lifting clamps are suitable for usage in normal atmospheric conditions, between -40°C en +100°C.
When use the vertical lifting clamps or horizontal steel clamps please be never overload a clamp and prevent the jerking of loads.
When via the steel plate clamps loading always use the whole jaw depth.
Never lift more than one plate at the same time.
Always keep your distance during lifting and descending of a load.
Prevent situations that anybody is under the load.
Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp.
Safety and Reliability with individual serial numbers
With Test Certificate for Proof Load applied which is double of SWL/WLL
We can also provide other arrangements such as Chain Sling and Wire Rope Sling in 2 Legged/4 Legged with Clamps as end fittings at additional cost.For exact cost please send your specific inquiry.

Specifications
Lifting capacity : 1000kg
Lifting height : 4 meter
Lifting speed : 3.4 Mtr/min
Voltage : 440v /50hz
Grade : M4
Power : 1.5kw / 4.8amp
Chain size : 8mm

Description:

Fixed 1000kg electric chain hoist with hook
1.Motor brake: adopt advanced magnetic cone brake to provide reliable stopping
2. Chain guide: high quality design provides smooth and quiet guidign og the lifting chain
3.Heavy duty motor: Squirrel cage parallel rotor motor; Cooling fins reduces the temperature of hoist and keep it working; The IP 55 protection can withstand demanding enviroment
4.Load chain: Carburizing chain or FEC chain is heat-treated for long life and endures harsh conditions;
5.Hook: hot forged high tensile steel, rigid and durable, fitted with safety latch to ensure safety lifting
6. Push button pendant: water-Proof and insulated, provides light and durable switching controls.

Product Features

Capacity: Toe - 5 Ton. 10 Ton, Top - 20 Ton.

Support feet provide extra stability.

Spring Return.

Quick, simple effortless hand operation.

Added versatility with lifting points at toe and head.

The toe is cast alloy steel in one piece for great strength and durability.

Low height toe allows lifting in confined area.

High strength return spring enables rapid ram retraction.

Swivel pump handle allows operator to pump from numerous positions.

Built in safety valve prevents over pressurization.

Internal oveflow valve functions as a stroke limiter.

Convenient carry handle.

Advantages:

• ¿¿¿¿¿¿¿¿¿2000kg manual pallet truck with 1.6 meter lifting height.
• Diversified operation, easy to feel high efficiency.
• Sturdy mast.
• Robot welding.
• Adjustable forged forks.
• Nylon wheels.
• Can operate by handle or by foot pedal.
• Small turning radius 1250mm.
• The imported sealing elements were introduced to guarantee high sealing performance of hydraulic system.

Electric Chain Hoists
• Die-cast aluminum Friction clutch Oil bath lubrication
• Pull-rotor motor brake with no brake coil to fail Heat-treated helical and spur gears Meet ASME B30.16, ASME HST-1, and NFPA 70
Designed with heavy-duty motor,

• heat-treated Grade 80 nickel-plated chain, easy access control panel, and cast-iron chain guide.
•Single-speed duty cycle is 60 min.

Technical Specifications

•Country of Origin : Japan
•Load Capacity : 1000 lb.
•Hoist Lift10 ft.
•Classification : H4
•Number of Speeds : 1
•Lift Speed : 7 fpm
•Motor HP : 0.34
•Voltage 3 Phase 440v
•Min. Between Hooks : 14"
•Reeving 1 Brake
•Pull Rotor Motor Clutch
•Push Button Control Pendant
•Mount : Hook Mounted - No Trolley