Taj Enterprises
Bhosari, Pune, Maharashtra
Send SMS
Send E-mail
| Power | 11kw / 15hp |
| Brand | Bharat Bijlee ltd |
| Speed | 2920 rpm |
| Phase | Three Phase |
| No Load Speed | 2500-3600 RPM |
| Insulation Class | B Class |
| Voltage | 440 V |
| Minimum Order Quantity | 1 Piece |
| Motor Rating | 0-1 HP |
| Fan Speed | 2800rpm |
| Power | 180 watt |
| Blower Type | Inflatable Blower |
| Usage/Application | Commercial |
| Power Source | Electric Blower |
| Product Type | Air Blower |
Powerful Air Flower for Inflatables
Material Plastic
Power 180W
Electric Power speed : 3450 rpm
frequency : 50/60HZ
Voltage 220-240V
Usage : Inflation & Deflation Usage For Bouncy Castle, Slide, Playground, Tent
| Model Number/Name | MC-2 |
| Pump Type | Metering/Dosing pump |
| Max Flow Rate | 31 ltr/hr |
| Material | Stainless Steel |
| Discharge Pressure | 100 kg/cm2 |
| Maximum Discharge Flow | 31 ltr/hr |
| Power Consumption | 750watt |
*Your information is safe with us.
| Motor Rating | 0-1 HP |
| Power | 0.14HP |
| Power Source | Electric Blower |
| Pressure | High Pressure, Low Pressure |
| Blower Type | Motorized Air Blower |
| Maximum Permissible Pressure (MPa) | 8 |
| Hose Length (meter) | 1.5 |
| Item Weight (Kgs) | 10 |
| Power Consumption (Watt) | 1500 |
High Pressure Washer
Working pressure: 8Mpa (80bar)
Working flow rate: 6.5 L/min
Max. Pressure water supply: 0.4Mpa (4bar)
Motor capacity: 1500 watt
Power supply voltage: 220-240v~50Hz
Maximum water temperature: 50°C
Weight: 10kg
| Size | 1" |
| Applications | For dispensng liquids out from the drums |
| Material of Construction | Polyproplene |
| Suitability | Oil based Media, Diesel, Kerosine |
Light Weight Rotary Pump For Dispensing Oil Based Fluids. Pump Body & Vanes Are Made From Polypropylene. Strainer Fitted At The Suction Tube Inlet Complete With Polypropylene Suction Tube & Bung Adaptor.
*Your information is safe with us.
*Your information is safe with us.
| Size | 3/4" |
| Material | Cast Iron |
| Usage/Application | Oil based Media |
Oil Barrel Pump offered can be made available by us in different functional capacities as well as model options so as to provide for consistent working support. Further, these pumps have around 0.15L per stroke and come supported by standard suction pipe. Some of its features include compact and lightweight design; cast iron pump housing support; suitable for dispensing oil from drums to smaller containers; can handle diesel fuel, gasoline, kerosene; comes with 3/4" discharge hose and others.
Specifications:
Single stage coolant pumps for conventional machines, highly efficient, up to 1 MTR. Immersion depth
used on:All lathes, Milling, CNC, retrofittings, EDMwire and other conventional machines,Cutting Machines, Printing machines Etc
Specifications :
Features:
*Your information is safe with us.
Geared Motor offered can be made available by us in different finish configuration choices so as to provide for reliable and consistent working. Further, these geared motors can also be OEM developed as demanded by the customers. Some of its features include durable structure designs; can handle various working conditions; high transmission efficiency; low energy consumption and superior performance; quality alloy steel based hard tooth surface gear; high loading and long working lift among others.
*Specification
MAX® is a small and medium sized geared motor series for
industrial use. Horizontal, Vertical and Line Power types are
available for any application.
Power : 1/4HP~20HP(0.2kw~15kw)
Gear Ratio : 1/5~1/600(Higher ratio is available for special design)
Flange Mounted Motor
We are offering our clients an excellent quality range of Flange Mounted Motors, which are manufactured from high grade quality raw materials. Rotor : Core of Insulated lamination with a high pressure die-cast Aluminum cage. The whole rotor assembly is dynamically balanced to ensure quiet and vibration free operation. Surface of rotor is protected by anti- corrosion coating.
Also provided with conduit entry. Earthing terminal is fitted at the box-side. High air flow external Bi-directional polypropylene fans assure low temperature rise to give an extended life of motor. Fan cowls are suitable gauge pressed steel construction, securely bolted to end shield of motor-body
Features:
• Robust design
• Optimum performance
• High tensile strength
*Your information is safe with us.
| Head | 9mtr |
| Max Flow Rate | 250lpm |
| Inlet X Outlet Sizes | 40x30mm |
Electric operated Oil barrel pump
Specifications :
Uses:
Caution:
Features:
| Power Source | Manual Blower |
| Pressure | Low Pressure |
*Your information is safe with us.
Hand blower with iron furnace offered provides for durable working support and perfectly matches up with the specific process application demands. These blowers find use in applications involving ventilation; cooling and heat dissipation; forced cooling and heat dissipation; as air filtration system and others. Some of its features include support outputting higher gas pressure; provides for larger air flow volume and low operating noise; optimized blade angles in superior wear resistant finish for longer service life; allows adjustment of fan's volume and pressure; higher transmission efficiency with low energy loss.
We are engaged in offering a wide range of Oil Lubrication Pump to our clients. This Oil Lubrication Pump is made with fine quality of material and liable to perform its working for long period of time. Our product is designed by our skilled professionals as per standard industrial norms.
Features:
*Your information is safe with us.
| Model | EP 440 |
| Brand | Asada Japan |
| Max Flow Rate | 3.0 L/min |
Operation |
|
| The power transmission from the electric motor to the output shaft of the variator is made by rollers which are hardened and ground. The rollers which are running in an oil-bath transmit power from a toroidal driving disk to a driven disc. The pressure between rollers and discs is adjusted by a clutch. The pressure is proportional to the load applied on the output shaft of the variator. When using high-speed variators max. motor power can therefore be transmitted at all speeds. Speed ratio 6:1. |
| When using the low-speed variators, where the variator unit has a built-in planetary gearing, a constant torque can be transmitted through the whole speed range. |
The planetary gearing produces low output speeds and large variation. The internal gear is journalled in the variator housing and it is driven by the radiator. The sun gear is driven by the motor at a constant speed. Through variation of the speed of the internal gear the speed of the output shaft is also varied. When the peripheral speed of the internal gear and that of the sun gear corresponds, the speed of the output shaft is zero. |
| The major part of the motor power is transmitted directly through the sun gear. In this way good efficiency and small dimensions are achieved. The efficiency is calculated as 85–90 %. |
| The speed can be regulated accurately by a dial. |
The output speed on the variator model RPF is infinitely variable between zero and the maximum speed. For each model a max. torque is stated which normally must not be exceeded, in order to save the variator from abnormally heavy wear. |
| The relationship between speed, torque and power is given by the equation Mv = 9555 x Ne/n where n = speed, rpm |
| Ex. RPF-4, 0–110 rpm and 1,5 kW can transmit a max. torque of 200 Nm. Full motor power can be transmitted between a speed of 9555 x 1,5/9,81 x 20 = 73 rpm and the top speed. |
| Within the range of 0–73 rpm the electric motor is stronger than the variator. The transmitted power is following a linear curve from 1,5 kW at 73 rpm to 0 kW at 0 rpm. |
| Phase | Three Phase |
| Motor Voltage | 200 Volts / 220 Volts |
| Power | 0.4 kW |
| Speed | 1410 RPM / 1690 RPM / 1700 RPM |
Contact Number : +91-9822885288
Product description :
The NIDEC-SHIMPO Ring-cone has a strong advantage over the common electronic variable speed drives in certain performance aspects. The Ring-cone is a mechanical adjustable speed drive utilizing a ring and cone friction power train – hence the name. The internal drive assembly consists of an input disc, a set of planetary cones, a control ring, the cam disc and a pressure control cam. The Ring-cone has a cam mechanism that adjusts to the environment downstream and can withstand a certain amount of shock load.
With a variable frequency drive, the output torque remains constant from base speed down to the lower limit, whatever it may be for the application. However, with the Ring-cone mechanical variable speed drive the output torque increases as the speed drops. At the low speed range, the output torque approaches 500% of the motor rating providing large breakaway torque values. The mechanical drive is also capable of handling a 200% overload capacity throughout the entire speed range. This performance advantage allows the user to set a low speed that can help the drive package push through difficult areas.
Although VFDs have become the default solution for industry and rightfully so, the mechanical variable speed drives has its niche in specific applications – such as extreme pumping, mixing, recycling, etc. – where its mechanical advantage and low maintenance requirements are an excellent fit. It is ideally suited for rugged, trouble free service in the worst environments including explosion proof, chemical processing, and washdown applications.
Three Phase Induction Motor Specifications:
Type: SF-JRF
Serial Number: BK6079013
Date: 1995-6
Poles: 4 Pole
kW: 0.4 kW
Hertz: 50 Hz / 60 Hz / 60 Hz
Voltage: 200 Volts / 200 Volts / 220 Volts
Amperage: 2.2 Amps / 2.0 Amps / 2.0 Amps
Repetitions per Minute: 1410 RPM / 1690 RPM / 1700 RPM
Frame: 71M
Rating: Continuous
*Your information is safe with us.