Taj Enterprises
Bhosari, Pune, Maharashtra
GST No. 27AADFT5294J1ZP
Call 08048550709 78% Response Rate
Send E-mail
- Home
- »
- Our Product Range
- »
- Machine Tool Accessories
| Number Of Spindle | 2 |
| Brand/Make | Sugino Corp |
| Usage/Application | Twin Drilling Application |
| Centre Distance | 23-91mm |
| Drilling capacity | 2-7.5mm |
Specifications :
Center Distance Min. to Max. (inches): 0.90 to 3.59(23mm to 91mm)
Drill Chuck Capacity (inches): 3/64 to 25/64
Chuck Type: Erickson collet model 200
Speed Ratio: 0.79
Max. Drill Size - Plastics Wood (inches): 3/8
Max. Drill Size - Aluminum (inches): 5/16
Max. Drill Size - Steel (inches): 15/64
Applicable Selfeeder Model: SFC-1305U
Weight (lbs): 4.0
Machining Specification:Drilling, Reaming, Tapping
Depth: Blind & Through
Coolant: Dry ,Oil Base ,Water Base
Working Direction of Spindle: Horizontal ,Stand Up ,Stant Down ,Vertical Down ,Vertical Up
Type of Spindle: Collet
| Type | ISO 40 |
| Size | 1-10 mm |
| Usage/Application | Drilling operation on milling machine |
| Weight | 6 kg |
| Ratio | 1:4 |
| Stroke | 45mm |
Used Precision Drill Quill with 45mm Drilling stroke and adjustable stop
Rigid fixation on the milling head by special adapter ringclamping
shaft: ISO 40
drilling stroke: 45mm
clamping range: 0.5-10mm
gear ratio 1: 4
weight: 6Kg
| Size | 24-215 mm |
| Type | MT 4 |
Description
It is a device specially made for rough boring with a range from 24.0 to 215.0mm in diameter. This device ensures an even cut distribution for it has both an axial tool-cutter holders and radial clamping holders that has exactly the same double-edge cutting capability. Typical application of this boring tool is a combination of roughing and finishing provided with different cutter shapes. In addition, due to its adjustable clamping holders it brings out the full capability of the tools double-edge cutting. In specific application such as for long and large-diameter bores, the product ensures good cylindricity
Benefits:
• Axially adjustable lnsert holder for constant division of cut between the two cutting edges
• Radially adjustable insert holder for full twin cutter effect
• Radially adjustable insert holders allow conversion to stepped tool for larger depth
• Compact tool design
• For deep roughing operations,chip removal is by
means of the spiral ???utes
• AppIication range from 24 mm-215 mm diameter
*Your information is safe with us.
| Length | 100-150 mm, 150-300 mm, >300 mm, 60-100 mm, 0-30 mm, 30-60 mm |
| Size | 0-2 mm |
| Type | Reduced Shank, Taper Point, Brad Point, Straight Shank |
MICRO BORING is adjustable and suitable for various diameter and depth of toles. With “cooling thought spindle”, chips are removable easily when holes are drilled deeply. They can be used in many kinds of machines as well as CNC machines for boring process.
PRODUCT DESCRIPTION
• This boring head has an excellent wide base design and high quality ensuring long life and rigidity even when it is used in an offset position.
• The screw is hardened and ground which guarantees long life and trouble free use.
• An ideal product for mill or jig bore operations.
• interchangeable shanks of the heads make it adaptable for use on different machines. Specifications : Diameter Range 6-84 mm 6-105 mm 6-135 mm 10-84 mm 10-105 mm 10-135 mm
| Brand | Alfred Herbert Ltd |
| Size | 90-300mm |
| Head Diameter | 300mm |
| Usage/Application | Facing, Boring, Grooving, Contouring |
Facing and facing Head is attached to the hollow spindle of horizontal boring machines. The Facing head is identical for all types of the machines with exception of the mount and the taper shank. The Facing head performs operations such as Facing, Boring, Grooving, Contouring and Taper Boring etc., This Facing Head can perform as a NC Facing Slide when mounted on a CNC Horizontal Boring machine with independent movement of Ram & Spindle.
DescriptionMaximum Diameter of Boring 90 – 300 MMMaximum Travel of Slide 120 MMMaximum Torque 6000 NMSpeed 100 RPM
| Usage/Application | Drilling Operation on Milling Machine |
| Chuck Type | 13 mm |
| Speed Ratio | 1 1 |
| Travel length | 60 mm |
Contact number: +91-9822885288
description:
Used Precision Drill Quill with 60mm Drilling stroke
clamping shaft : ISO 40
drilling stroke: 60mm
clamping range: 1-13mm
gear ratio 1: 1
weight: 6Kg
*Your information is safe with us.
| Application | for Boring and Facing |
| Fine feed per gradustion | 0.005mm |
| stroke of slide block | 200mm |
| Material | Hard Alloy |
| Holding Capacity | MT 3 |
| Usage/Application | lapping - honing - angular correction reaming |
| Spindle Taper | MT 4 |
Brand : SMP TECHNIK ; FRANCE
Product Video :
Floating tool-holder / boring / radial / with adjustable angle
Characteristics
Clamping method:
floating
Applications:
boring
Other characteristics:
radial, with adjustable angle
Description:
• Radial tolerance adjustable between
0 and 2 mm according to model.
• Angular correction adjustable between
0 and 1 degree.
Characteristics :
• Radial play adjustable from 0 to 2 mm accordlng to model
• Angular correction adjustable from0-1 degree.
• This is the most universal chuck. For use with all reamers it can also be utilised as a coupling whenever an application requires a parallel or angular off-set capability
• lapping - honing (especially when using a diamond honer),
• driving of boring bars or any other attachments.
Sensitivity:
The tool holder sleeve is moving on precision balls and coupled Io the chuck body through an Oldham type clutch driven by means of precision rollers
Therelore the tool keeps all its mobility regardless of the torque resulting from the cutting load
This new design prevents the bearing surfaces from being damaged by the balls during an incident (if a tool snaps, in the event of programming mistake,impact, very heavy cutting loads etc)
Precision
When the tool holder ???anged sleeve is
moving radially. its axis stays perfectly parallel with the chuck axis. This advantage provides an absolute squareness between the hole axis and the Reference faces.
Stability:
All components of heavy duty design are made of nickel chrome sleel and are hardened and ground. High precision and great care are given to the
manufacturing and assembling of the chucks. Therefore, the reliability of all their qualities is ensured lor a long period of time
| Size | 1-13mm |
| Spindle | BT 50 |
Key Specifications/Special Features:
1. Material: high quality steel
2. Type: BT30 1-13mm, BT40 1-16mm, BT50 1-16mm
3. High accuracy: 4. BT40 integrated drill chucks
5. Integrated keyless drill chuck with BT mounted shank
6. This integrated design can prevent drill chuck separate accidentally with arbor
Features:
1.High precision, big grip force, high reliability
2. Self tighting feature automatically increase gripping proportional to increased torque to prevent tool shank slipping
3. Accuracy below 0.10mm
4. Standard: DIN69871A
5. Easy operation with a spanner
*Your information is safe with us.
| Brand | San Ou |
| Holding Capacity (mm) | 1.0 to 13.0 |
According to the needs and demands of our customers, we are engaged in offering a wide range of Keyless Drill Chuck. The Keyless Drill Chuck we offer easy to use and is widely demanded by our clients. Moreover, these can bear adverse conditions. In addition to this, these are widely used in civil engineering, road building and other applications.
Features:
| Brand | SANDVIK KOSTA |
| Spindle Taper | ISO 50 |
| Morse Taper | MT3, MT4 , MT5 |
| Arbor dia | 25 , 27, 32, 40, 50 mm |
| Arbor length | 200-600 mm |
*Your information is safe with us.
| Usage/Application | Grinding |
| I Deal In | New and Second Hand |
We offer Grinding Spindles which are basically used for Deep Hole Grinding. Available varying sizes, shapes and specifications, these are internal grinding spindle that are used to serve needs of many industrial processes. The taper grinding we provide have applications in many machinery tools such as grinding wheels for precision, size and surface finishing.
Usage:
These spindles can be mounted on bore grinding machines and Toolpost grinders of lathe machine. Application of deep hole grinding spindle is to grind long dia bores.
Features:
These are made to suit job dia 50 mm to 500 mm, length 100 mm to 1500 mm depending upon the configuration of job
| Type | OD Burnishing Tool |
| Burnishing Length | 135mm |
| Size | 39 mm |