Taj Enterprises

Description

Converts from a bench-top metal cutoff saw to a hand-held portable metal cutting band saw in just seconds.

Features

Blade Size: 1140 x 13 x 0.65mm

Table size: 7-1/2" x 5-1/2"

Capacity: 127 x 127 mm

Round Capacity: 4-3/4-Inch Square

Motor: 1100 W 230V AC

Variable Speed
• Blade FPM : 0-2.4 m/s

Weight: 38-Pound

Hydraulic rebar cutter / Steel bar cutting machine
Features:
• Hydraulic Multi Cutter
• (Re-Bar cutter)
• Maximum bar diameter: 16mm
• Rated Power Output: 1100W
• Voltage: 220V / 50hz

Features: - Input Power 1500w. - No-load spd :4500rpm. - Blade dia. 200mm. - Lightweight aluminum base. - Max. cutting cap. (DL) 80x205mm. - Adjust. bevel cutting 0-45 deg. . - Dust collection bag. - Retractable safety blade guard. - Includes front mount handle for mitre angle adjustments (not pictured)

Horizontal Metal Cutting Bandsaw Machine
Electric Motor : 1hp 3ph
Coolant pump : 1/8hp 3ph
Machine size : 1320mm
Cutting Capacity :
Round : 200mm
Flat : 200x150mm
Blade length : 3000x27x0.9mm

Specifications for the above Rod Cutter Machine1) The above rod cutter can be used to cut upto 25 or 32 mm steel or M.S. rods.2) These are high speed blades and come with full guaranteeApart from these machines the other shearing machines like 47R, G3/L we also deal in all other possible hand shearing as well as threadle shearing machines. We also keep trunk folding or metal folding machines and press.Concrete Reinforcing Steel Bar Cutter has the following advantageous features The formed body welded box-type of Bar Cutter is of study construction due to SM steel plates. This bar cutters are equipped with study and well dimensioned gear lever transmission which transmits the force directly to the shear part. The slide holding the shear blade is precisely guided between body plate of bar cutter to prevent it being forced out of line. This system not only keeps the frictional losses to a minimum but also gives the machines a high degree of efficiency so that optimum use is made of the operators effort. The hand-levers on all models, when in basic position, are securely held by a retaining spring to prevent accidental falling. Bar Cutter is very economical and labour saving job-site equipment, indispensable modern building technology

Motorized abrasive cutting machine is widely used in fabrication and structural industries for cutting metal.Its heavy cast iron body provides accurate and easy cutting of metal.It is equipped with Continuous duty AC motor which increases its product life.It is supplied with a heavy steel vice to strongly grip the job to be cut
Specifications:

Size of the machine: 14"

Abrasive wheel size: 300 × 2mm

Motor capacity : 2hp 3ph 2800rpm

Weight: 35kg

Bearing type & Mechanical Hacksaw machine
Specifications:
• Cutting capacity: Round: 150mm Square: 130mm Cutting at 45°: 90mm blade size: 350mm Stroke adjustment: 88mm× 157mm V belt section: A-46 , A-33 , A-25 Floor space: 280mm×740mm Motor H.p: 1hp/1440rpm Net weight: 110kg

• Suitable for 7" - 8" Capacity
• Suitable for 10" - 12" Capacity
• Suitable for 14" - 16" Capacity

Description

The RIDGID No. 932VS Portable Band Saw will cut
most ferrous and non ferrous bar, tubing and irregular
shaped materials. Its 4.3/4″ capacity will allow cutting
nominal size 4″ soil pipe or 4″ conduit. It features ball and
needle bearing construction throughout which assures
long and continued service.

Specifications
Cutting Capacity..........4.3/4″ Round Stock,
4.1/2″ x 4.3/4″ Rectangular Stock,
Motor No..............................932VS
Type ..........................Universal
Volts ..........................115 VAC, 50-60 Hz
Amps .........................6
No Load Speed SFM ...............Variable 100-245
Drive .............................Spur Gear and Chain
Blade Size ....................1/2″ x .020 x 44.7/8″
Weight ..........................14 Lbs.

HMT Tansi Hydraulic hacksaw Machine
Specifications : Max. Diameter: 200 mm
Max. Square: 175 mm
Stroke length (non adjustable): 140mm
No. of speed strokes : 3
Range of speed strokes (per minute): 80 - 100 - 125
Blade Size : 400 x 32 x 1.6 mm
Power of main motor: 0.75 kw, 415 V, 3 Ph, 50 Hz
Power of coolant motor : 0.09 kW
Space occupied ( L x B x H ): 1175 x 820 x 1150 mm
Net Weight: 500 Kg

Pump for Mechanical Hacksaw