Taj Enterprises
Taj Enterprises
Bhosari, Pune, Maharashtra
Send SMS
Send E-mail

Clamping Devices

Wholesaler of a wide range of products which include magnetic table, magnetic compound sine table, magnetic chuck, v block, collet fixture and 2 jaw true chuck.
Request CallBack
Magnetic Table
Get Best Quote

Magnetic Table

Approx. Price: Rs 8,000 / PieceGet Latest Price

Permanent Magnetic Chucks Rectangular
( Size : 4" x 8", to 12" x 24" )
Features :
• Suitable to work both in drift or wet grinding process.
• Extra thick top plates ensure many years of life even after frequent re-grinding.
• Supplied with side & end stops.
• High performance at a competitive price.
Application :
Designed for application on surface grinding machine as well as to serve as a working aid on various Engineering working sites.


Yes! I am Interested
Request CallBack
Magnetic Compound Sine Table
Get Best Quote

Magnetic Compound Sine Table

Approx. Price: Rs 35,000 / PieceGet Latest Price

Description:
Double tilting fine permanent magnetic chuck, suitable for single or compound angle, front,back and left inclination,precision grinding to various flat grinder,discharge working machine.Through special processing to reach higher precision.Precision of worktable will be not change during magnetizing and demagnetizing.Density structure make it easy to holding small parts, suction can reach 100N/cm2
The easily operated sine table with a Neomicro chuck is ideal for precise operations such as grinding components with a maximum accuracy of angle, measurement or EDM. Thanks to its hardened steel base, the sine table is extremely solid. The magnetic chuck is kept in a set
position by supporting blocks with a side mounted,
locking mechanism. The chuck is equipped with a robust control mechanism which ensures that the product will work reliably over many years. The pole plate where the work pieces are clamped, can be tilted in one or two axes, vertical to each other.

Construction:

  • Magnetic system with permanent neodymium magnets
  • Pole plate with transverse poling, pole pitch 2 mm (1.5mm steel and 0.5 mm brass)
  • Accurate hardened steel base
  • Waterproof design
  • Fixing by side stable supports
  • Maximal angle accuracy +/- 5 seconds
  • Parallelism +/— 5 micron/100 mm
  • Single sine table allows the setting of angles with the gauge ranging from 0 - 45"
  • Compound type allows tilting in two axes vertical to each other. Required angles are set in both longitudinal and traversal direction according to gauges

Yes! I am Interested
Request CallBack
Magnetic Chuck
Get Best Quote

Magnetic Chuck

Approx. Price: Rs 8,200 / PieceGet Latest Price
With the support of our experienced team, members, we bring forth Magnetic Chuck that is made available in rectangular as well as round magnetic types. Manufactured from high power ceramic and Alnico V magnets, these chucks are used for surface tool & cutter grinders, grinding machines and spark erosion machines. Proffered range is widely acclaimed for its strong magnetic grip to hold any type of ferrous material.

Features:

  • Durable
  • Reduces the cost
  • Reliable performance

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
V Block
Get Best Quote

V Block

Approx. Price: Rs 1,850 / SetGet Latest Price

Tool Maker's Vee Block & Clamping sets-Precision
Features :
Manufactured and numbered in matched pairs, each pair has two 90 degree Vees of different capacities which are identical to the Vees of its matching block. The Vees are ground central, parallel and square with the ends and sides.
Each pair of vee Blocks comes compete with a pair of rigid and robust clamps.

Application :
Useful for holding work securely during drilling, milling and grinding operations and also in layout and inspection work.
Construction :
Made from finely selected tool steel fully hardened to 50-55 HRC.

Accuracy :
Permissible height difference between matched pairs within 5 microns
Parallelism and squareness of Vee Grooves with respect to all surfaces within 8 microns
Parallelism of opposite faces of Vee Blocks within 8 microns
Squareness of adjacent exterior faces of vee Blocks within 8 microns
Flatness of working faces within 5 microns


Yes! I am Interested
Request CallBack
Collet Fixture
Get Best Quote

Collet Fixture

Approx. Price: Rs 1,500 / PieceGet Latest Price
Product Details:
Holding Capacity (mm)3 to 25mm
Material GradeCast iron

Being a quality oriented organization, we offer our wide range of Collet Fixture, which is finely, processed using high grade techniques. We assure that our clients remain satisfied from our qualitative product range. Our offered ranges of Collet Fixture are precisely designed by the team of experts. We have a proven track record of never disappointing our customers on the quality front. Our entire product ranges have a long service life and increase satisfaction level of the user.

Features:

  • Precise design
  • Reasonable price
  • Low maintenance

Specifications:
  • Custom:Standard/Special
  • Application:CNC lathe machine
  • Material:Steel/Carbide
  • Power:Electric
  • Type:Sleeve
  • Advantages:High quality,High precision,Short delivery

Additional Information:
  • Item Code: Colletfixture
Yes! I am Interested
Request CallBack
2 Jaw True Chuck
Get Best Quote

2 Jaw True Chuck

Approx. Price: Rs 7,500 / PieceGet Latest Price

Two jaw chucks are used to hold parts such as round parts with 2 opposed bosses on them,or other such problem parts ,which cannot be held in regular 3 jaw or 4 jaw chucks .

These are tested by our quality controllers to ensure their high quality and compliance with various quality parameters. Our 2-Jaws True Chucks are widely acknowledged by our clients for their high tensile strength, durability & longevity. These are fabricated using high grade factor inputs and advanced technology as per the international quality standards. Moreover, we offer this premium quality product range at market leading price.

Specifications :

in2.1654
Maximum SpeedRPM2500
Weightlb39
Fin6.9291
Ein6.2992
Cin0.1575
Hin3.150
Top Jaws hin1.776
Top Jaws Widthin1.575

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
6 Jaw Self Centering Chuck
Get Best Quote

6 Jaw Self Centering Chuck

Approx. Price: Rs 8,200 / PieceGet Latest Price
Product Details:
Model6 Jaw

6 jaw accuracy self centering tru chuck are mainly used to grip round machined or unmachined job having thin wall like pipe etc.. The job is not damaged as the gripping pressure is divided on six sides.One set of reverse jaws, Mounting Bolts, Operating Key & Inspection Report is provided with each chuck.


Specifications :

  • Size: 100mm to 600mm
  • Type of jaws: Solid jaws-set (outside jaw & inside jaw)or two-piece reversible jaws-set
  • Type of mount: Plain back


Sizes in mm:
• 100
• 125
• 150
• 200
• 250
• 315
• 350
• 400
• 450
• 500
• 600


Yes! I am Interested
Request CallBack
Pneumatic Cylinder Power Chuck
Get Best Quote

Pneumatic Cylinder Power Chuck

Approx. Price: Rs 35,000 / PieceGet Latest Price
Product Description: The stationary clamping device is highly versatile and can be fitted onto various drilling and milling machines, and on a work gripper multiplate. It has a piston stroke of 15mm and maximum permissible pressures of 0.7MPa pneumatic and 1.5MPa hydraulic. It generates maximum forces of pneumatic push at 8.5MPa and pneumatic pull at 8.1MPa. The hydraulic push is 20.8kN and pull is 20.1kN. Its weight is 15kg. Its matching chuck has a size of 6". Characteristics: Key Features Piston Stroke (mm): 15 Max. Allowable Pressure; Pneumatic: 0.7MPa Hydraulic: 1.5MPa Max. Thrust (MPa); Pneumatic - Push: 8.5, Pull: 8.1 Hydraulic - Push: 20.8kN, Pull: 20.1kN Weight (kg): 15 Matching Chuck Size: 6 inch

Yes! I am Interested
Request CallBack
Combination Chuck
Get Best Quote

Combination Chuck

Approx. Price: Rs 14,500 / PieceGet Latest Price
also known as
  • Centering chucks
  • turning chucks
Features and Benefits
  • Combination independent and self-centering chucks allow each jaw to be operated independently or move simultaneously as a self-centering scroll chuck.
  • Cast iron also called semi-steel is the industry standard for chuck body material.
Specifications
Chuck Type : Combination Independent & Self-Centering
Nominal Chuck Size : 8"
Number of Jaws : 4
Diameter (Decimal Inch) : 2.1700
Body Material : Cast Iron (Semi-Steel)
Reversible Jaws : Reversible Jaws
Chuck Diameter (mm): 203.20
Chuck Diameter (Inch) : 8
Minimum Jaw Capacity (Decimal Inch) : 0.1500
Maximum Jaw Capacity (Inch) : 8
Body Length (Decimal Inch) : 3.7800
Maximum RPM :2000

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Used Eccentric Compensating Chuck with Retractable Jaws
Get Best Quote

Used Eccentric Compensating Chuck with Retractable Jaws

Approx. Price: Rs 38,000 / PieceGet Latest Price
Power Operated Eccentric Compensating Chuck with three / two retractable jaw chuck permits shafts, bars, forgings to be machined full length in one set up, centre to centre. In the first operation the component is gripped on the jaws. In the finishing operation the jaws are retracted and the component is driven by the face driver and OD is machined. The special jaws are designed to clamp the component as close to the centre to avoid distortion of the component and provide inconsistent gripping. Eccentric Compensating Chuck with Retractable Jaws and face drive (PER) is used for machining forgings and black bars between centres in single setup, (i.e.) no second operation necessary. This Chuck is designed to machine components centre to centre with great accuracy. The retractable jaws are actuated by a hydraulic cylinder or an also centre to centre, since the jaws have an eccentric clamping drive. After various machining operations are done on the component, without stopping the machine the clamping jaws are retracted. The torque is then transmitted through the face driver for driving the jaws. The gripped portion can now be finished with fine depth of cut. This ensures that the component is machined right upto the chuck face and the centre to centre machining of component is completed. The chuck body is made from forged medium carbon steel and toughened. The levers and hinge pins are made from nickel chrome steel, case hardened and ground in all working surfaces. The hard jaws are made from low carbon steel, case hardened and ground. The special jaws are designed to clamp the component as close to the centre to avoid distortion of the component and provide inconsistent gripping.

Yes! I am Interested
Request CallBack
Mini Self Centering Chucks
Get Best Quote

Mini Self Centering Chucks

Approx. Price: Rs 5,500 / PieceGet Latest Price
Mini Self centering chucks
Type:
  • 3 Jaw Self Centering tru chuck
  • 4 Jaw Self Centering tru chuck
Sizes:
  • 60mm
  • 80mm

Yes! I am Interested
Request CallBack
Accuracy Adjustment Chuck
Get Best Quote

Accuracy Adjustment Chuck

Approx. Price: Rs 8,000 / PieceGet Latest Price

These chucks are available with 3 jaws and 6 jaws and are referred as AAC-3 and AAC-6 respectively. These are used where same size of job is to be held repeatedly and accuracy desired is very high. The chuck accuracy can be adjusted within 0.005 mm with the help of micro-adjustment screws. The repetitive accuracy available with these type of chucks is within 0.013 mm. These chucks are used for tool room and grinding shop work. One set of reverse Jaws, Mounting Bolts, Allen Key, Operating Key and Inspection Report is provided with each chuck.


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Chuck Mounted Ratchet Indexing Fixture
Get Best Quote

Chuck Mounted Ratchet Indexing Fixture

Approx. Price: Rs 25,000 / PieceGet Latest Price

Horizontal Ratchet Indexing fixture can be used for cutting processes like Milling, Drilling, Grinding, etc. They are available in manual model with maximum clamping range of 300mm
These fixtures are suitable for both tool room operations as well as high production Indexing work where they offer both economy and quality in the form of less downtime and precision repeatability in job after job, hence lesser rejections. Their high quality construction gives them a long life and also makes them capable
taking heavy loads. Their compact and space saving design makes them convenient and easy to use. They can be used on a wide variety of machines like Milling, Drilling, Grinders, etc.
Features:
• Available in Ratchet indexing models of 6 station and 12 station
• These attachments are mounted with chucks of different sizes Ranging from 150-300mm
• Suitable for cutting processes like Milling, Drilling, Grinding.
• Lever operated locking arm prevents deviation during machining operations
• These ratchet indexers are constructed with precison grinded parts to prevent machining errors and provide precision repeatability in operations.


Yes! I am Interested
Request CallBack
Big Bore Self Centering Chuck
Get Best Quote

Big Bore Self Centering Chuck

Approx. Price: Rs 17,000 / PieceGet Latest Price

These chucks are available with 3 jaws, 4 jaws and 6 jaws and are referred as BBC-3, BBC-4 and BBC-6 respectively. These are similar to Normal Standard Chucks, the only difference is that the bore is larger than normal Chucks. These chucks are used where machine is lighter and the job requires large bore in the chuck. One set of Reverse Jaws, Mounting bolts, Operating Key and inspection report is provided with each chuck.

Specifications :

  • Size Range : 16" - 32" (400mm - 800mm)
  • Number of Jaws: 3 Jaws
  • Inch Serration
  • Standard Stroke
  • Open Center - Extra Large Through Hole

Yes! I am Interested
Request CallBack
Collet Indexing Fixture
Get Best Quote

Collet Indexing Fixture

Approx. Price: Rs 12,000 / PieceGet Latest Price

Indexing Collet Fixture

Features :

  • Adjustable locking levers ensure perfect vibration less working.
  • The base plate is splash-proof and is provided with an inter-changeable index plate.
  • Clamping and unclamping is fast, Indexing is quick and accurate. Hence one can achieve substantial increase in efficiency at the same time maintaining indexing accuracies.
  • Ideal for batch and mass production, tool rooms and production shops.
Application :
  • The Collet Fixture is developed for various production jobs. The standard collet of Traub A-25 or A-42 can be conveniently used on the fixture to perform various milling operations like slotting, gangmilling, square, hex milling and PCD Drilling.
  • Supplied without collet.

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Horizontal Chuck Indexing Fixture
Get Best Quote

Horizontal Chuck Indexing Fixture

Approx. Price: Rs 36,000 / SetGet Latest Price
Horizontal chuck indexing fixture

Features :

  • Suitable for milling / drilling / grinding operation
  • Chuck Diameter (Inch) : 8
  • Number of Indexing Increment : 24 / 30
  • Center line Height : 7.5"
  • Chuck Through Hole Size : 68mm
  • Masking Plate Divisions: 24 / 30
  • Indexing Accuracy (sec.) 25.00

Yes! I am Interested
Request CallBack
Compound Sliding Table
Get Best Quote

Compound Sliding Table

Approx. Price: Rs 6,000 / PieceGet Latest Price
Features :
  • The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0° is marked to show the angular movement.
  • Base have bolt slots for machine mounting.
Application :
  • These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations
Construction :
  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Top surface of the table has two equally spaced cross T-Slots.

Yes! I am Interested
Request CallBack
Vertical Chuck Fixture
Get Best Quote

Vertical Chuck Fixture

Approx. Price: Rs 12,000 / PieceGet Latest Price
Vertical chuck mounted fixture
MILLING CHUCK / CLAMPING DEVICES / MACHINING FIXTURES

  • Chuck Size : 6"
  • Maximum Clamping Size: 170 Mm
  • Centre Height : 140 Mm

Suitable for :
  • Job Holding application
  • Vertical clamping during Milling operation
  • Inspection Purpose

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Tapping Chuck
  • Tapping Chuck
  • Tapping Chuck
Tapping Chuck
Get Best Quote

Tapping Chuck

Approx. Price: Rs 2,400 / PieceGet Latest Price

DESCRIPTION :

Tap #10 to 1/2" (M3 - M12) threads

Quick loading and unloading

Adjustable clamping range

Good stability, high precision

FEATURES :
Turn your bench Drill mill, or lathe into a tapping machine. Tap #10 to 1/2" (M3 - M12) threads. This is not a reversible tapping head. You must reverse the spindle to extract the tap. Mounts to 3/8"-24 UNF or 1/2"-20 UNF threading spindle. Twin locking system For round shank & Square Shank.


Yes! I am Interested
Request CallBack
Used Hydraulic Power Chucks
Ask For Price

Used Hydraulic Power Chucks

Product Price : Get Latest Price
Product Details:
BrandGMT,FORKARDT,ROHM,KITAGAWA

Used Hydraulic Power chucks

Sizes available : 3",6",8",10" & 12"

Brands available : GMT , ROHM , FORKARDT , KITAGAWA

Features:

Power Operated Chucks without through bore can be used as a replacement for manual chucks on a conventional lathe to increase the productivity.

These can be actuated by hydraulic, pneumatic or electro- mechanical actuators.

The actuating unit imparts a linear motion of the wedge is transformed to radial movement of base jaws.

This transformation provides a mechanical advantage of 1:4. This ensures a minimum of 1:2 mechanical advantage after providing for internal losses, self locking effect and losses in gripping power at high speed.


Yes! I am Interested
Request CallBack
  • Used Threading Die Head Lanco Type
  • Used Threading Die Head Lanco Type
  • Used Threading Die Head Lanco Type
Used Threading Die Head Lanco Type
Ask For Price

Used Threading Die Head Lanco Type

Product Price : Get Latest Price

Contact number : +91-9822885288

Specifications :
Lanco type threading die head S
tatus : Used
Size : 3/8"-1.1/2"
Chaser size : 4" x 1.3/64" (set of 4pcs)
Product description :
Used Lanco Type threading die heads are of revolving type for application to hand operated, semi accurate to hand operated, semi automatic & automatic threading machines of rugged construction the heads provide accurate and trouble free operation over long production runs. Constructed of specially selected alloys steel, the NCT Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Expanding Mandrel 5"
  • Expanding Mandrel 5"
  • Expanding Mandrel 5"
Expanding Mandrel 5
Ask For Price

Expanding Mandrel 5"

Product Price : Get Latest Price
For Price enquiries kindly contact on +91-9822885288 EXPANDING MANDREL Expanding mandrels are suitable for thin walled components Expanding mandrels are the ideal solution to various internal clamping problems. Expanding mandrels provide the benefits of versatility and accuracy when compared to other workholding methods. The power operated, flange type expanding mandrels can be used on any machine with drawbar facility. The natural pull back action of the sleeve ensures the component is resting against the locating face. There is high clamping force due to the clamping sleeve being in contact along its entire length through double angle. Expanding mandrels provide the following workholding features: High gripping Versatility High level of concentricity Quick and secure clamping Positive location against backstops Controlled datums Generous expansion capacities Positioning accuracy Sleeve interchangeability – As sleeves in one type are interchangeable, one single expanding mandrel covers a very large clamping range No pressure marks in the clamped bore. Easy loading Expanding mandrels may be dedicated to one component or a range of component types and sizes, locating in and gripping component bores.

Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
Request CallBack
  • Crank Shaft Machining Chuck
  • Crank Shaft Machining Chuck
  • Crank Shaft Machining Chuck
Crank Shaft Machining Chuck
Ask For Price

Crank Shaft Machining Chuck

Product Price : Get Latest Price
Crank shaft Machining Chuck is a special power chuck designed for crank shaft Eccentric Turning and milling operations. This chuck can be tailor made to suit machine. Crankshaft is held between centers of RH and LH chuck. Aligning jaw of the chuck facilitates job clamping. Chucks are actuated by hydraulic cylinders.

Yes! I am Interested
Request CallBack
  • Used Master Gripping Chuck
  • Used Master Gripping Chuck
  • Used Master Gripping Chuck
Used Master Gripping Chuck
Ask For Price

Used Master Gripping Chuck

Product Price : Get Latest Price
Product Details:
BrandREISHAUER , SONALKAR , CENTRAL
Material GradeCast iron
We have emerged as one of the leading supplier of Used Master Gripping Chuck.

Yes! I am Interested

Explore more products

X