Holding Capacity | 6" |
Number Of Jaws | 3 |
Weight | 30kg |
Power | Pneumatic & Hydraulic |
Diameter | 6" |
Jaw Of Chuck | 3 |
Product Description:
The stationary clamping device is highly versatile and can be fitted onto various drilling and milling machines, and on a work gripper multiplate. It has a piston stroke of 15mm and maximum permissible pressures of 0.7MPa pneumatic and 1.5MPa hydraulic.It generates maximum forces of pneumatic push at 8.5MPa and pneumatic pull at 8.1MPa. The hydraulic push is 20.8kN and pull is 20.1kN. Cylinder weight without power chuck is 15kg. Its matching chuck has a size of 6".
Characteristics:
Key Features
Piston Stroke (mm): 15
Max. Allowable Pressure
Pneumatic: 0.7MPa
Hydraulic: 1.5MPa
Max. Thrust (MPa)
Pneumatic - Push: 8.5
Pull: 8.1
Hydraulic - Push: 20.8kN,
Pull: 20.1kN
Weight (kg) with chuck: 30kg
Matching Chuck Size: 6 inch
Holding Capacity | 200mm |
Number Of Jaws | 3 |
Automation Grade | Automatic |
Brand | GMT,FORKARDT,ROHM,KITAGAWA |
Used Hydraulic Power chucks
Sizes available : 3",6",8",10" & 12"
Brands available : GMT , ROHM , FORKARDT , KITAGAWA
Features:
Power Operated Chucks without through bore can be used as a replacement for manual chucks on a conventional lathe to increase the productivity.
These can be actuated by hydraulic, pneumatic or electro- mechanical actuators.
The actuating unit imparts a linear motion of the wedge is transformed to radial movement of base jaws.
This transformation provides a mechanical advantage of 1:4. This ensures a minimum of 1:2 mechanical advantage after providing for internal losses, self locking effect and losses in gripping power at high speed.
*Your information is safe with us.
Material | Cast Iron |
Number Of Jaws | 3 |
Size | 80mm |
Holding Capacity | 80mm |
Automation Grade | Manual |
Diameter | 80mm |
Number Of Jaws | 3 |
Size | 6" |
Holding Capacity | 150mm |
Automation Grade | Manual |
These chucks are available with 3 jaws, 4 jaws and 6 jaws and are referred as BBC-3, BBC-4 and BBC-6 respectively. These are similar to Normal Standard Chucks, the only difference is that the bore is larger than normal Chucks. These chucks are used where machine is lighter and the job requires large bore in the chuck. One set of Reverse Jaws, Mounting bolts, Operating Key and inspection report is provided with each chuck.
Specifications :
*Your information is safe with us.
Usage/Application | Turning and Grinding opertions |
Number Of Jaws | 4 |
Holding Capacity | 200mm |
Thru Hole Size | 50mm |
Size | 5" |
These chucks are available with 3 jaws and 6 jaws and are referred as AAC-3 and AAC-6 respectively. These are used where same size of job is to be held repeatedly and accuracy desired is very high. The chuck accuracy can be adjusted within 0.005 mm with the help of micro-adjustment screws. The repetitive accuracy available with these type of chucks is within 0.013 mm. These chucks are used for tool room and grinding shop work. One set of reverse Jaws, Mounting Bolts, Allen Key, Operating Key and Inspection Report is provided with each chuck.
Model | 6 Jaw |
6 jaw accuracy self centering tru chuck are mainly used to grip round machined or unmachined job having thin wall like pipe etc.. The job is not damaged as the gripping pressure is divided on six sides.One set of reverse jaws, Mounting Bolts, Operating Key & Inspection Report is provided with each chuck.
Specifications :
Sizes in mm:
• 100
• 125
• 150
• 200
• 250
• 315
• 350
• 400
• 450
• 500
• 600
*Your information is safe with us.
Usage/Application | Industrial |
Number Of Jaws | 3 |
Automation Grade | Automatic |
Size | 8" |
Holding Capacity | 6" |
Usage/Application | Bolt threading |
Material | Steel |
Bore Size | 40mm |
Size/Dimension | 3/8"-1.1/2" |
Contact number : +91-9822885288
Specifications :
Lanco type threading die head S
tatus : Used
Size : 3/8"-1.1/2"
Chaser size : 4" x 1.3/64" (set of 4pcs)
Product description :
Used Lanco Type threading die heads are of revolving type for application to hand operated, semi accurate to hand operated, semi automatic & automatic threading machines of rugged construction the heads provide accurate and trouble free operation over long production runs. Constructed of specially selected alloys steel, the NCT Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.
Capacity | 6" |
Number Of Jaws | 2 |
Two jaw chucks are used to hold parts such as round parts with 2 opposed bosses on them,or other such problem parts ,which cannot be held in regular 3 jaw or 4 jaw chucks .
These are tested by our quality controllers to ensure their high quality and compliance with various quality parameters. Our 2-Jaws True Chucks are widely acknowledged by our clients for their high tensile strength, durability & longevity. These are fabricated using high grade factor inputs and advanced technology as per the international quality standards. Moreover, we offer this premium quality product range at market leading price.
Specifications :
in | 2.1654 | |
Maximum Speed | RPM | 2500 |
Weight | lb | 39 |
F | in | 6.9291 |
E | in | 6.2992 |
C | in | 0.1575 |
H | in | 3.150 |
Top Jaws h | in | 1.776 |
Top Jaws Width | in | 1.575 |
*Your information is safe with us.
Chuck Size | 8" |
Type | Vertical & horizontal |
Chuck Size | 3" |
indexing | 12 stations |
Indexing Collet Fixture
Features :
Chucksize | 150mm |
Horizontal Ratchet Indexing fixture can be used for cutting processes like Milling, Drilling, Grinding, etc. They are available in manual model with maximum clamping range of 300mm
These fixtures are suitable for both tool room operations as well as high production Indexing work where they offer both economy and quality in the form of less downtime and precision repeatability in job after job, hence lesser rejections. Their high quality construction gives them a long life and also makes them capable
taking heavy loads. Their compact and space saving design makes them convenient and easy to use. They can be used on a wide variety of machines like Milling, Drilling, Grinders, etc.
Features:
• Available in Ratchet indexing models of 6 station and 12 station
• These attachments are mounted with chucks of different sizes Ranging from 150-300mm
• Suitable for cutting processes like Milling, Drilling, Grinding.
• Lever operated locking arm prevents deviation during machining operations
• These ratchet indexers are constructed with precison grinded parts to prevent machining errors and provide precision repeatability in operations.
*Your information is safe with us.
Holding Capacity (mm) | 3 to 25mm |
Material Grade | Cast iron |
Being a quality oriented organization, we offer our wide range of Collet Fixture, which is finely, processed using high grade techniques. We assure that our clients remain satisfied from our qualitative product range. Our offered ranges of Collet Fixture are precisely designed by the team of experts. We have a proven track record of never disappointing our customers on the quality front. Our entire product ranges have a long service life and increase satisfaction level of the user.
Features:
Tilting Indexing Device ( with 3 Jaws Chuck Mounting )
Size : 4"
Features :
For bigger quantity work, rapid indexing is simplified by use of replaceable notched rings can be notched to individual requirements.
Rapid direct indexing through 360 degree by means of scales graduated in units of one degree division on the flanges.
Indirect indexing is by means of worm and worm wheel giving direct reading of one minute on handwheel scales.
The chuck can be swivelled up to 90 Degree
Worm Gear is easily and quickly detachable for direct indexing.
Three Jaws chuck is standard equipment with one set of reverse jaws.
The Graduation ring on hand knob is adjustable
Application :
An ideal indexing device for mechanics, tool makers and engravers for speedy and precision milling, drilling, boring and grinding operations.
*Your information is safe with us.
Brand | REISHAUER , SONALKAR , CENTRAL |
Material Grade | Cast iron |